B117011 ошибка на тигуане

Горит надпись: Неисправность системы беспроводного доступа и пуска!
Может провода не хватает ))):ay:

У меня такое было на новой машине. Не был вставлен штекер в одном из замков — либо выскочил, либо на заводе не доткнули. Разобрали дверь, вставили обратно, собрали — всё ok.

Если делать самому, то нужно снять обшивку двери, снять неподвижную часть ручки, вытянуть провод со штекером каким-нибудь крючком и вставить в разъём.

Появилась такая же проблема после мойки пробег 3600 а к дилеру ехать облом надо будет снимать регистратор и радардетктор ставил не у них.
залез шурком пишет
——————————————————————

Контроллер 05: Допуск и Запуск (J518) Описания: 5K0-959-434.clb
Номер детали SW: 5K0 959 434 B HW: 5K0 959 434
Компонент:: VWKESSYPQ35GP 086 1101
Ревизия: 00086000 Номер лицензии: 0190935023
Кодировка: 030C0C
Код сервиса:: WSC 01530 935 00200
ASAM установки: EV_KESSYPQ35G A02013
ROD: EV_KESSYPQ35G_VW36.rod
VCID: 346D0BA09F204E9

Hi all,

First time post so hopefully put this in the right place, as its a bit of a generic one!

So I have a 15 plate MK7 Golf R, the KESSY system has started playing up and constantly beeping an error message which is a right pain while driving!

I have an OBDeleven, checked the codes and worked out its the passenger door giving me the issues, basically the handle needs replacing…

Even a local garage is quoting £302 for the door handle/install and colour code, which in my cheap mind is ridiculous for a handle.

Fault code that I cant clear:
(B7) Start System Interface B117011- Front passenger access/start system antenna short circuit to ground (static)

I thought I could do the long coding side, and disable the KESSY passenger door, as I never use it and would be an easy fix to stop that bloody «keyless system fault» popping up. I deactivated:
Passive entry frt.pass. door handle
Passive exit fri pass. door handle

Then cleared the fault codes, the only one remaining is the one above in bold. It keeps coming back up as soon as I restart the car/exit the car.

Any ideas of a way to clear it permenantly? I could just unplug the handles electronics I suppose, but not sure if that would help. I know

I will keep an eye on ebay etc for a replacement KESSY handle, but any help would be much appreciated! I know its a bodge job but with Christmas coming up I want to delay this for 3 months or so, but the beeping is killing me!

Thanks in advance

To anyone who has had the same issue, I just wanted to update the post- never know it might help!

So the specific part for the replacement handle is: 5G0837205Q
I did give VW a call and the new part number which fits a MK7 Golf R is- 5G0837205R
GRU at the end means unpainted/primed to be painted to your car colour. Both of the above are fine for ref.

They quoted me on the phone £196.49 for the handle unpainted. They could paint for £60 more, or you can get the colour code yourself and spray it for about £20.

I then had a £150 install fee with VW (yeah right), local garage would do it for £70 plus painting on top etc.
So total about £302 with them painting it etc at the local garage.

Ridiculous for one bloody handle!

Get onto ebay, now I had gleamed the exact part number (cheers VW), I knew which would fit my golf! £50 for a second hand one, £90 to respray and fit from a diff local garage who didnt care about fitting 2nd hand parts
= £140.

Thats how I got round it! Bloody annoying, but half the price of a new one/fitting. VW would have been £350 ish with install for ref!