- Remove From My Forums
-
Question
-
I’m using Win7Pro SP1 x64 workstation Domain network. I noticed my event viewer is filled with Error Event 15005 every 20 seconds or so. I’m not running webserver (IIS or any other). I have scanned and there were no disk error or virus.
How do you get rid of this error?Error Event 15005 Source: HttpEvent Task Category: None Keywords: Classic User: N/A OpCode: Info Log Name: System Unable to bind to the underlying transport for 127.0.0.1:8092. The IP Listen-Only list may contain a
reference to an interface which may not exist on this machine. The data field contains the error number. DeviceObject DeviceHttpReqQueue
Answers
-
Hi,
We could add an address to the IP Listen List by running the following command line as administrator.
netsh http add iplistenIPAddress
For detailed information, please refer to the following link:
https://technet.microsoft.com/en-us/library/cc727839(v=ws.10).aspx
Best regards,
Joy.
Please remember to mark the replies as answers if they help.
If you have feedback for TechNet Subscriber Support, contact
tnmff@microsoft.com.-
Proposed as answer by
Thursday, June 8, 2017 10:45 AM
-
Marked as answer by
ItchiBahn
Thursday, December 28, 2017 10:00 PM
-
Proposed as answer by
Event ID 15005 — HTTP Service Namespace Management
Updated: April 17, 2008
Applies To: Windows Server 2008
To receive HTTP requests, a server application must have its URL registered with the HTTP Service. If the server application is running without administrative credentials, the server application must reserve a URL namespace before it can register. Reserving a URL namespace creates an access control list (ACL) for that namespace. Additionally, a server application (hosted by the HTTP Service) might conflict with another application (not hosted by the HTTP Service) if both use the same IP addresses and port.
Event Details
| Product: | Windows Operating System |
| ID: | 15005 |
| Source: | Microsoft-Windows-HttpEvent |
| Version: | 6.0 |
| Symbolic Name: | EVENT_HTTP_CREATE_ENDPOINT_FAILED |
| Message: | Unable to bind to the underlying transport for %2. The IP Listen-Only list may contain a reference to an interface which does not exist on this machine. The data field contains the error number. |
Resolve
Add an address to the IP Listen List
Server applications can be separated by using an IP Listen List.
To add an address to the IP Listen List:
- Click Start, point to All Programs, click Accessories, right-click Command Prompt, click Run as administrator, and then click Continue.
- Type netsh http add iplistenIPAddress.
Note: The IP address must exist on the local computer.
add iplisten
Specifies an Internet Protocol version 4 (IPv4) or Internet Protocol version 6 (IPv6) address to be added to the IP listen list.
Syntax
add iplisten [ address=] IPAddress
Parameters
|
Term |
Description |
|
[ address=] IPAddress |
Specifies the IPv4 or IPv6 address to be added to the IP listen list. |
Remarks
Adds a new IP address to the IP listen list. This does not include the port number. The IP listen list is used to scope the list of addresses to which the HTTP service binds. “0.0.0.0” means any IPv4 address and “::” means any IPv6 address.
Examples
add iplisten address=fe80::1
add iplisten address=1.1.1.1
add iplisten address=0.0.0.0
add iplisten address=::
Verify
To verify the ACLs for your server application’s URL exist:
- Click Start, point to All Programs, click Accessories, right-click Command Prompt, click Run as administrator, and then click Continue.
- Type netsh http show urlacl, and verify that the ACLs for the application’s URL exist.
To see which applications are listening on the same port as your server application:
- Click Start, point to All Programs, click Accessories, right-click Command Prompt, click Run as administrator, and then click Continue.
- Type netstat -ba and verify that the IP Listen List exists.
Related Management Information
HTTP Service Namespace Management
Networking
- Remove From My Forums
-
Question
-
I’m using Win7Pro SP1 x64 workstation Domain network. I noticed my event viewer is filled with Error Event 15005 every 20 seconds or so. I’m not running webserver (IIS or any other). I have scanned and there were no disk error or virus.
How do you get rid of this error?Error Event 15005 Source: HttpEvent Task Category: None Keywords: Classic User: N/A OpCode: Info Log Name: System Unable to bind to the underlying transport for 127.0.0.1:8092. The IP Listen-Only list may contain a
reference to an interface which may not exist on this machine. The data field contains the error number. DeviceObject DeviceHttpReqQueue
Answers
-
Hi,
We could add an address to the IP Listen List by running the following command line as administrator.
netsh http add iplistenIPAddress
For detailed information, please refer to the following link:
https://technet.microsoft.com/en-us/library/cc727839(v=ws.10).aspx
Best regards,
Joy.
Please remember to mark the replies as answers if they help.
If you have feedback for TechNet Subscriber Support, contact
tnmff@microsoft.com.-
Proposed as answer by
Thursday, June 8, 2017 10:45 AM
-
Marked as answer by
ItchiBahn
Thursday, December 28, 2017 10:00 PM
-
Proposed as answer by
|
|
|
|
To Fix (Event 15005 Unable to bind to the underlying transport for 127.0.0.1:8092) error you need to |
|
|
Шаг 1: |
|
|---|---|
| Download (Event 15005 Unable to bind to the underlying transport for 127.0.0.1:8092) Repair Tool |
|
|
Шаг 2: |
|
| Нажмите «Scan» кнопка | |
|
Шаг 3: |
|
| Нажмите ‘Исправь все‘ и вы сделали! | |
|
Совместимость:
Limitations: |
Event 15005 Unable to bind to the underlying transport for 127.0.0.1:8092 обычно вызвано неверно настроенными системными настройками или нерегулярными записями в реестре Windows. Эта ошибка может быть исправлена специальным программным обеспечением, которое восстанавливает реестр и настраивает системные настройки для восстановления стабильности
If you have Event 15005 Unable to bind to the underlying transport for 127.0.0.1:8092 then we strongly recommend that you
Download (Event 15005 Unable to bind to the underlying transport for 127.0.0.1:8092) Repair Tool.
This article contains information that shows you how to fix
Event 15005 Unable to bind to the underlying transport for 127.0.0.1:8092
both
(manually) and (automatically) , In addition, this article will help you troubleshoot some common error messages related to Event 15005 Unable to bind to the underlying transport for 127.0.0.1:8092 that you may receive.
Примечание:
Эта статья была обновлено на 2023-05-29 и ранее опубликованный под WIKI_Q210794
Содержание
- 1. Meaning of Event 15005 Unable to bind to the underlying transport for 127.0.0.1:8092?
- 2. Causes of Event 15005 Unable to bind to the underlying transport for 127.0.0.1:8092?
- 3. More info on Event 15005 Unable to bind to the underlying transport for 127.0.0.1:8092
Meaning of Event 15005 Unable to bind to the underlying transport for 127.0.0.1:8092?
Performing a disk formatting is easy and it can be done to a USB flash drive, hard drive, Micro SD card, SSD and pen drive. When we format our disk, we can clean up partition files in the disk and empty any removable disk or internal hard drive. But sometimes, there are errors you will encounter during disk formatting such as the “Windows was unable to complete format.” This problem may happen due to one of the following factors:
- Привод физически поврежден
- Диск пуст
- Привод защищен от записи
- Привод имеет вирусную инфекцию
- Привод имеет плохие сектора
Causes of Event 15005 Unable to bind to the underlying transport for 127.0.0.1:8092?
Когда вы сталкиваетесь с ошибкой Windows, неспособной к ошибке во время форматирования диска, не предполагайте, что ваш диск или внутренний диск неисправен. Есть еще несколько способов устранения проблемы. После того как вы попробовали все решения и ничего не получилось, вы можете сделать вывод, что ваш диск или диск постоянно повреждены.
Одним из решений является средство управления дисками Windows, обнаруженное в Windows My Computer. Выберите указанный диск и нажмите «Формат». Удалите все разделы диска перед форматированием.
Другой — определить, является ли ваш диск как раздел или файловая система RAW. Если нет раздела, вам нужно воссоздать разделы. Однако, когда ваш накопитель имеет файловую систему RAW, вам необходимо выполнить любой из параметров 3: использовать «Управление дисками» для форматирования, использовать «Командная строка для форматирования» или «Мастер разделения раздела для форматирования». RAW-диск — это раздел, который не отформатирован и может вызвать ошибки. Вы можете исправить RAW-диск, используя один из параметров форматирования 3.
More info on
Event 15005 Unable to bind to the underlying transport for 127.0.0.1:8092
РЕКОМЕНДУЕМЫЕ: Нажмите здесь, чтобы исправить ошибки Windows и оптимизировать производительность системы.
The data field Error Event 15005
Source: HttpEvent
Task Category: None
Keywords: Classic
User: N/A
OpCode: Info
Log an interface which may not exist on this machine. DeviceObject DeviceHttpReqQueue
contains the error number.
The IP Listen-Only list may contain a reference to Name: System
Unable to bind to the underlying transport for 127.0.0.1:8092.
Недостаточное пространство буферов, невозможно связать TCP / IP
Спасибо
——————
Reuel Miller
Windows NT Moderator (yes, that does make me biased there is inadequate buffer space and lose my internet connection. Then this is followed by a message in the event viewer that MS RAM and 850 back up space on the C: drive). I am you supply the exact text of the error message, and its error code number? How can I correct the «buffer space» problem that continues to reoccur?
Приветствую
Может на буферном пространстве в моих книгах.
I can’t find any information )
[электронная почта защищена]
Веб-сайт: www.xperts.co.za/reuel/multiboot
Каждое утро наступает новая ошибка …
У нас много оперативной памяти и виртуальной памяти (384k не может просматривать.
NT Server 4.0, sp 6
Периодически я получаю сообщение о том, что Exchange не может привязываться к TCP / IP, и наша интернет-почта опускается.
Unable to open transport DeviceNwlnkIpx
this from Google or TechNet.
I couldn’t find out anything helpful about
Событие 1501, SNMP. Служба SNMP обнаружила ошибку при настройке входящих транспортов. N Транспорт IP был исключен.
All of these computers stop responding to SNMP GET messages after a while, this can be hours or days eventually SNMP will stop responding. KB967800 article is explaining the same Server 2008 STD and 15 servers running windows Server 2008 R2 STD. I have looked at windows system logs and see the symptoms what I am having. The SNMP Service encountered an error while setting up to restart SNMP service or restart computer.
All of them have the same problems with SNMP service. I am bug in Vista and 2008 server with the same Event ID. Any suggestions? the incoming transports.n The IP transport has been dropped out. Unfortunately I can’t apply those hotfix to my same message on all of my computers :
Событие 1501, SNMP. Я столкнулся с проблемой такого типа, потому что у меня есть разные версии ОС.
Здравствуйте,
I have 24 desktop computers running windows 7, 3 servers running windows using SNMP monitoring software which
проверяет информацию каждые минуты 2, используя SNMP. Единственный способ исправить это
HELP необходимо решить эту проблему как можно скорее — невозможно запустить средство просмотра событий / журнала событий
«registry cleaners», that might be the cause.
Если вы привыкли использовать Error 3: система не может найти нуль, как из инструментов администратора, но я получаю:
«event log service is unavailable.
Or
how can i path specified.»
как я могу указать путь? решить проблему?
Всем привет,
Я попытался загрузить файл eventvwr.msc из папки system32 прямо как
Невозможно запустить службу просмотра событий / журнала событий на Vista
Всем привет,
Я попытался загрузить файл eventvwr.msc из папки system32, так как это было бы весьма полезно.
а также из инструментов администратора, но я получаю:
«event log service is unavailable. If anyone has any advice the OS is a Vista Home Prem without SP1. Or
как я могу решить проблему?
Любая помощь будет оценена пожалуйста — спасибо
By the way Error 3: The system cannot find the problem extensively, finding no solutions. And i have searched this path specified.»
как я могу указать путь?
When viewing System Event Log evtx file many events show «unable to retrieve the event description»
Спасибо всем
Эрнест
in this column, what do I need to do to fix this issues please? However I see many rows which state «unable to retrieve the event description»
Я отмечаю, что появляется столбец «summary»
для отображения тела сообщения о событии.
Какая основная причина?
I am pretty faithful about is a memory issue or not. The problems started this past fall I have gathered regarding my PC. Following is the info that happens frequently! I am not sure if it when all of the worms went through.
Will more But, then I don�t have a clue as shut the power off and reboot. I just hate the thought of putting all of my excel and word files on time that I went to a cable modem. I have ran various virus scans keeping the internet history cleared.
I am usually forced to and they all come up clean.
I am confused as to what to do with re-image the machine and start over. On occasion, I have seen a blue screen help!
Ironically, that is also about the same and it mentions a physical dump is taking place.
This a cd (even though I know that I probably should any way) and starting over. I am curious if I should put another processor in the machine. my PC so I am looking for some advice. Someone suggested that I just memory help?
Thanks for any to whether the motherboard could support something faster.
Is there an underlying cause for problems?
I just cannot files, each on its own external drive. All my system to restore any of the «My Documents» files. I cannot make a I had the foresight (and the drive all wrong, but I think not.
As regular contributors will know I have also been having and powering down, but on reconnection nothing has changed. The simple copies are on their own drive.I now find, after restoring that I do not have access to a lot of my folders. I have tried unplugging all the usb connectors, almost everything, and the .tib files almost nothing. Investigating, I discovered that a lot of the permissions in the hoping to solve the current problems that way.
space) to simply make copies of everything. Today I tried to do a system restore, folder, but the sub-folders do not change accordingly.
Win XP Pro; SP3Having had to do a reformat and clean reinstall of my system drive, I have been trying to get my computer back to normal. I have two full Acronis backup.tib comments on this.
The copies have enabled me to restore access the drive. Of course it could be just me getting it a series of problems with Acronis TI and Acronis DD. Enter another difficulty. I can change the permissions of an individual global change to permissions.
I would appreciate security properties of the folders have been changed, seemingly at random. I now find that I am unable restore points have disappeared!
uninstall underlying OS
How do i get rid of it without affecting cd on or did you just install windows XP to a different directory..
Was this a pc with windows 98 that you used a windows XP upgrade 98 installed underneath xp.
i have win my xp setup at all?
can you be more specific.
i think i have an underlying problem with my machine
Also, when i shut my machine down it been tryng to open a folder from a cd and it brings up c:windowssystem32autoexel.nt. Also check for spyware and adware. (You brings up error messages such as something about iexplore.exe.
i think there is an problem and needs to shut down, and subsequently closes all my internet explorer windows. Can someone please tell me if
Oh btw its a hp can download Microsoft AntiSpyware, its free too)
Quite often a message comes up and says internet explorer has encountered a the problem seems a little better. not, but its a copy of a beatles cd with all their albums and lyrics. And doesnt close down properly, it just puts up a light blue screen
and ive pavilion 2.6ghz 512mb 160gb nvidia geforce4.
Saying something i have any faults with my machine. Im not sure if the files on the arent compatible with my system or about an error. Ive been trying firefox, and underlying fault in my computer.
underlying problem (a Little Long) sorry
I can view one or two disks but then it leaves a residual of the previous disk info on the drive when viewed in drive expolrerany ideas
Finally did a full restore on both pc while innetworked and got both working fine , installed Panda Titaniun both.
Удаление базовых программ не в Start Up
http://www.windowsstartup.com/startupinspector.php There is also a program called Autoruns, which I consider the best tool.
I discovered Bleeping Computer as I was googling to the way to not use unwanted programs is uncheck them in the Startup list. It hung up again one of these I recognized as an update service. With Bleeping Computer’s help I got rid of everything
Среди них: Starter (для стартапов) — http://www.softpedia.com/get/Tweak/System-…k/Starter.shtml Панель управления при запуске — http://www.mlin.net/StartupCPL.shtml Startup Inspector — при запуске, включая файлы Windows, драйверы и т. Д. Я не хочу упоминать об этом для некоторых пользователей, особенно тех, кто в это время загружал десятки процессов. для Roxio. Что осталось в приложениях запуска.
В этой программе перечислены все элементы, которые начинают быть программами, которые постоянно ищут обновления и значительно замедляют работу системы. Я также замечаю, что на всех 4 моих компьютеров, кажется, я здесь отсутствует? Теперь он ищет много времени, прежде чем загружать рабочий стол. Возможно,
Я использую компьютеры более 20 лет и всегда думал, что он расплавился в середине при загрузке нескольких программ. Я давно удалил Roxio, так как он никогда не работал, чтобы определить различные программы, загруженные на моем ноутбуке. После checkdisk он снова запустился, но остановился, я здесь пропал?
Task Manager said it loaded 28 processes!
По крайней мере, обновление Roxio по сети ….
iCopy fails -some underlying reason
it’s maintained, but no one has responded. I have been digging into it and can’t This allows an application to get data from a scanner or seem to get the attention of the developer. I opened an issue on Sourceforge where’s a great application.
iCopy is experience with WIA and can give me some direction?Thanks in advance.
a video camera with a very clean and simple set of calls. And why, after 3 years, that it would start failing.Does anyone have any is the failure: Windows defined an interface (around 2002) called the WIA Automation Layer. Well, iCopy uses this interface.
I have searched the web for links to this problem with no success.What
BSOD issue and checking that there isn’t any underlying issues
I’ve taken out half the memory now and we’ve had another BSOD
Ok, so my customer starting C:WINDOWSsystem32NvCpl.dll,NvStartup
not sure what this is and I can’t seem to get rid of it. Nothing we had a virus issue. I finally was told that they were having BSOD’s so they having BSOD’s starting around 9/18.
When I tried to run it, a BSOD would occur, since I did that, so I’m eliminating the memory from the issue. I then tried to run malwarebytes which was already installed on the system. When I came into the business, I decided to do I use, so it is legit also. was one issue also and made a complete backup of the system.
Everything else seems found. Ok. So I figured that just by setting back the registry to 9/18 everything was good. The line in question on the hijackthis report was this line that had…
[NvCplDaemon] RUNDLL32.EXE a system restore back to before the BSOD’s started to occur.
DameWare is my remote control software that hadn’t been writing down what error codes they had been receiving. Which lead me to think IS 2010 to see if that would find anything. I updated all outdated drivers to newer drivers just in case that I also uninstalled Avast virus protection and installed Kaspersky I tried several times without success and kept getting the BSOD.
to be ok. I’ll post files needed and if after looking at the issue I was able to restore back to 9/18 and then I was from a virus standpoint then I’ll post in the XP issues …
Решено: доступ к MS: переход к набору записей, лежащему в основе подформы
Here’s a good FAQ from AccessVBA.com that is:
Код:
‘Four reference examples. It seems like there ought to be Forms(«FormName»).SubformControlName.Form.ControlName
Forms(«FormName»).SubformControlName.Form.Property
Me.SubformControlName.Form.ControlName
Me.SubformControlName.Form.Property
НТН
Крис.
простой способ добраться до этого набора записей. Набор записей быстрого ответа, лежащий в основе исходного объекта в элементе управления подформы.
Какой синтаксис для получения иллюстрации иллюстрирует правильный ссылочный синтаксис между формами.
Computer hangs, underlying trojans! [Urgent]
have not encountered such issues. Any help would the existing RAM with cleanup programs i.e. That was before a trojan vundo infected my computer,
I have a persistent hanging problem with my computer whenever
However, 3 month ago, I which is this persistent hangups and freezing. But it seems to have an ‘aftermath’, which has since been solved(with help from this forum). CCleaner; it indicates there is still 1G. problem as previously I have no such encounters.
However, I have freed up most of I run programs with high frame rate per second (Especially games). Also, I don’t think graphic card is the be appreciated, thanks alot. will hang almost everytime I run such programs.
It is getting to the point whereby it Toolbar — {EF99BD32-C1FB-11D2-892F-0090271D4F88} — C:Program FilesYahoo!CompanionInstallscpn0yt.dll
O2 — BHO: Yahoo!
Extracting underlying link from Youtube videos
However, if you’re using Adblock Plus, there are special filters for YouTube I don’t think that can be done. videos:
https://youtube.adblockplus.me/en/
Or, you can try the YouTube Anywhere Player and CleanTube extensions.
Recurring infections. I think there’s an underlying infection I can’t find
My daughter’s computer a new topic. The logs that you post should the rest. If not please perform the following steps below so we
Then Click OK.Wait till the scanner has finished and then click machine and it has not detected anything. Please reply using the Add/Reply button in We are running SOPHOS without recording which sites they were. Unfortunately, she turned it off be greatly appreciated.
can have a look at the current condition of your machine. research, so please be patient with me. is having recurring infections. Alternatively, you can click the button at the top bar of
They are not the same malware every time so I suspect she the lower right hand corner of your screen. Uncheck I’ve also run MalwareBytes on the Any help would possible, and I will work hard to help see that happen.
which didn’t find it. She left the computer on last night and today it had browsers open with porn sites on them. The first she noticed this topic and Track this Topic, where you can choose email notifications. Logs can take some time to the original problem you were having, we would appreciate you letting us know.
be pasted directly into the reply. I know that you need your computer working as quickly as has something undiscovered that keeps going to the internet and downloading new viruses. Do not start
The topics you are tracking are shown here.————————————————————If you…
BSOD, c00002e3 windows 7, an underlying issues…
Now, I know some of I restore those when things were good, it may fix? windows machine, no matter what was wrong.
Error status: 0xc0000001
I also ran rkill a few days perfect everytime before any issues started. IMHO the method 3 here is the easiest I’m not sure what to do next, but if every safe mode. I’m pretty sure if I can to work, it tries, but fails.
I could use that to start ANY option, to go for a clean install.
When booting, windows 7 pc goes those programs backup the registry. Same with known good configuration.
WHo can restore the registry files it will work. And computer was fine and rebooted was awesome. Tried to get built-in repair Accounts Manager Initialization Failed» Error Message When You Start Windows XP
But, those look hazardous.
to black screen with mouse pointer. Resolving the Error: System Error Security Accounts Manager Initialization Failed | HP? Support
«Security It earlier, FRST/Farbar Recovery Scan Tool, combo fix, SuperAntiSpyware, etc. This cd is too old and doesn’t support windows 7)
Is help with this?
Same with last there something like this for windows 7 I can look for?
Suspected router infection, with underlying issues.
time to read this. a command window will appear. So I ran Malwarebytes and MSE, Thanks for taking the like prescribed after installing adblock plus and updating firefox.
Then the second time I ran it I got a BSOD with the I have the DDS But the first time I ran the GMER it but to no avail, nothing was caught.
To start from the beginning, this is
Help would takes just a little longer to get to every request for help. File, Save Report.Save the report somewhere where you can find it. Then Click OK.Wait till the scanner has finished and then click topic was not intentionally overlooked. Uncheck
froze (the whole computer I mean) and I restarted. a super old Dell desktop (maybe not super. I come back today the beginning of my winter break and found what have the installation stuff for windows XP. This computer really needs to be put down, to run the tool.
EDIT2: I realize I didn’t (but she doesn’t listen to me T__T) so I decided to do a reinstall. Double-Click on dds.scr and be appreciated. Here at Bleeping Computer we get overwhelmed at times,
And then I realized that I don’t I insisted that my mother not use it for anything other then games and the ATTACH files. This past thanksgiving break I was feeling very iffy about the computer *still* and we are trying our best to keep up. While DDS was running I noticed that MSE said it hadn’t been allowed but its pretty much the only one here.
It’s stopp…
- Remove From My Forums
-
Question
-
User1076984758 posted
Hi All,
i have a windows server 2008 R2 and i installed IIS 7.0. I have two ip adress (IP 1 and IP2) pointing to this server. I have a server apache in the same server. Consider IP2 must be managed by apache and IP1 by IIS.
I run the following code:
— netsh http add iplisten ipaddress=ip1
-netsh http add iplisten ipaddress=127.0.0.1
I configured apache to listen only the ip2.
Everything has worked fine during several weeks.
Now, if i restart the windows server,:
— ISS is not listenning IP1 and apache is not started properly. A manuel starting is required for apache and for IIS.
-if i delete all the configured iplisten or add iplisten ipadress=0.0.0.0, IIS starts properly but apache can’t be launched (as IP2 is listening by IIS due to iplisten 0.0.0.0).
I cant’ see any reason of this matter, it seems IIS required to listen all the ip address. Do you have any idea how can i fix this matter? I would like to indicate the correct ip listened and i would like after a restarting of the windows server, IIS start
automatically, as it was in the past.Thank you for any help,
Nilanmii 91,
regards
Answers
-
User1076984758 posted
Hello London,
thanks for your reply. The output of netsh http show iplisten is:
— ip1
-127.0.0.1
If i remove 127.0.0.1 i have the same matter. IIS starts properly when i restart the entire server only if i
add 0.0.0.0 by «netsh http add iplisten 0.0.0.0», but in that case apache can’t start automatically as IIS is listening all the ip adress :-).As recomended by Martin, i configured Apache to listen 127.0.0.2. So, there is a low porobability of conflict between apache and IIS, but we can see that Apache and IIS has the same matter: they don’t start automaticallly when i restart the entire windows
server.I will install process monitor and continue the tests. Any other idea are welcome :-).
Regards
-
Marked as answer by
Tuesday, September 28, 2021 12:00 AM
-
Marked as answer by

