Код ошибки 8ddd0001

The website has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem.

Некоторые пользователи Windows видят ошибку 8DDD0020 всякий раз, когда пытаются загрузить обновление вручную через каталог Центра обновления Windows. Сообщается, что эта проблема возникает в Windows 7, Windows 8.1 и Windows 10.

Ошибка каталога Центра обновления Windows 8DDD0020

После тщательного изучения этой конкретной проблемы выясняется, что существует несколько различных основных причин, которые могут вызвать эту ошибку. Вот краткий список потенциальных виновников, которые могут нести ответственность за эту проблему:

• Устаревший сторонний браузер. Как оказалось, вы можете ожидать увидеть этот код ошибки, если соединение с каталогом Центра обновления Windows будет отклонено из-за устаревшей версии браузера. В этом случае вы можете решить проблему, обновив версию браузера до последней версии или придерживаясь Internet Explorer при использовании каталога Центра обновления Windows.
• Поврежденный кеш параметров обозревателя — при определенных обстоятельствах вы можете ожидать увидеть эту проблему из-за довольно распространенного сбоя ActiveX, который в конечном итоге блокирует соединение с каталогом Центра обновления Windows. В этом случае вы можете решить проблему, принудительно очистив кеш Internet Options, связанный с браузером IE.
• Сбой Internet Explorer 11. Если вы столкнулись с этой проблемой в Windows 10, скорее всего, проблема вызвана неправильно настроенным протоколом безопасности. Чтобы легко решить эту проблему (без установки восстановления), вы можете временно отключить IE11, чтобы принудительно использовать более старую версию Internet Explorer при загрузке обновлений из каталога Центра обновления Windows.
• Повреждение системного файла — при более серьезных обстоятельствах вы можете увидеть, что эта проблема возникает из-за некоторого типа повреждения системного файла, которое прерывает соединение с WUC. В этом случае вам следует пойти на ремонтную установку / чистую установку, если встроенные утилиты не могут решить проблему.
• Проблема с лицензированием. По мнению некоторых затронутых пользователей, эта ошибка также может возникать из-за несогласованности лицензирования, которую вы не можете решить самостоятельно. В этом случае вам необходимо связаться с агентом поддержки Microsoft и попросить его изучить проблему.

Теперь, когда вам известны все потенциальные ситуации, которые могут вызвать эту ошибку, вот список методов, которые другие затронутые пользователи успешно использовали, чтобы разобраться в этой проблеме:

1. Обновите браузер или используйте Internet Explorer.

Если вы видите эту ошибку только при попытке доступа к каталогу Центра обновления Windows из стороннего браузера, такого как Google Chrome или Mozilla Firefox, вам следует начать с принудительного обновления своего браузера до последней версии.

Скорее всего, вы видите ошибку 8DDD0020 из-за эксплойта безопасности, который еще не был исправлен вашим браузером, поэтому Microsoft отклоняет соединение.

Если вы уже удостоверились, что ваш сторонний браузер обновлен, но по-прежнему видите ту же ошибку, единственный вариант на этом этапе — переключиться на Internet Explorer и попытаться использовать каталог Центра обновления Windows оттуда.

Internet Explorer предустановлен по умолчанию независимо от вашей версии Windows, поэтому вам нечего устанавливать.

Чтобы открыть Internet Explorer, нажмите клавиши Windows + R, чтобы открыть окно «Выполнить». Внутри введите «iexplorer» в текстовое поле и нажмите Enter, чтобы автоматически открыть окно IE.

Откройте окно Internet Explorer

Как только вы окажетесь в окне Internet Explorer, используйте каталог Центра обновления Майкрософт в обычном режиме и проверьте, по-прежнему ли вы видите ошибку 8ddd0020 при попытке установить обновление из каталога.

Если вы все еще сталкиваетесь с той же проблемой даже при использовании Internet Explorer, перейдите к следующему потенциальному исправлению ниже.

2. Сбросьте кеш параметров Интернета в IE.

Если вы видите ошибку 8DDD0020 при использовании Internet Explorer (IE 8 или более ранней версии), скорее всего, проблема связана с ошибкой ActiveX, которая не позволяет вашему компьютеру установить безопасное соединение с каталогом Центра обновления Windows.

В этом случае исправить просто — вам нужно будет выполнить полный сброс встроенного браузера, открыв вкладку «Дополнительно» в настройках обозревателя и сбросив кеш, содержащий временные файлы ActiveX.

Несколько затронутых пользователей подтвердили, что это исправление наконец позволило им, наконец, нормально использовать каталог Центра обновления Windows.

Следуйте приведенным ниже инструкциям, чтобы сбросить кэш параметров Интернета на вкладке «Дополнительно»:

1. Нажмите клавишу Windows + R, чтобы открыть окно «Выполнить». В текстовом поле введите inetcpl.cpl и нажмите Enter, чтобы открыть меню свойств Интернета. Если вам будет предложено UAC (Контроль учетных записей пользователей), нажмите Да, чтобы предоставить доступ администратора.Открытие экрана «Свойства обозревателя»
2. Как только вы окажетесь в меню «Свойства Интернета», щелкните вкладку «Дополнительно» в меню ленты вверху.
3. На вкладке «Дополнительно» прокрутите вниз до параметра «Сбросить Internet Explorer» и нажмите кнопку «Сброс».Сброс настроек IE
4. При появлении запроса на подтверждение установите флажок Удалить личные настройки и нажмите «Сброс», чтобы очистить текущий кеш Internet Explorer и все временные данные, связанные с вашей учетной записью.Сброс настроек Internet Explorer
5. После успешной очистки кеша перезагрузите компьютер и посмотрите, устранена ли проблема.

3. Вернитесь из IE11 (только для Windows 10).

Если вы столкнулись с этой проблемой в Windows 10, скорее всего, проблема возникла из-за сбоя в Internet Explorer 11.

Несколько пользователей, столкнувшихся с той же проблемой, подтвердили, что им удалось решить проблему, отключив IE 11, заставив ОС вернуться к предыдущей версии Internet Explorer.

Мы выявили несколько пользовательских отчетов, в которых затронутым пользователям удалось решить эту проблему с помощью экрана «Функции Windows», чтобы предотвратить использование IE 11 при установке Windows.

Примечание. Это изменение не обязательно должно быть постоянным. Вы можете только временно отключить IE11 и поработать с Каталогом Центра обновления Windows, прежде чем вернуться к последней версии Internet Explorer.

Следуйте приведенным ниже инструкциям, чтобы временно отключить Internet Explorer 11 на экране функций Windows, чтобы получить доступ к каталогу Центра обновления Windows через браузер IE / Edge:

1. Нажмите клавишу Windows + R, чтобы открыть диалоговое окно «Выполнить». Затем введите appwiz.cpl в текстовое поле и нажмите Enter, чтобы открыть экран «Программы и компоненты».Открытие экрана «Программы и компоненты»
2. На экране «Программы и компоненты» нажмите «Включение или отключение компонентов Windows» (в меню слева).Отключение компонентов Windows

   Примечание. Когда вам будет предложено UAC (Контроль учетных записей пользователей), нажмите Да, чтобы предоставить доступ администратора.
3. На экране «Функции Windows» снимите флажок, связанный с Internet Explorer 11, и нажмите «Да» в ответ на запрос подтверждения, чтобы отключить Internet Explorer 11.Отключить Internet Explorer 11
4. После отключения Internet Explorer 11 перезагрузите компьютер и посмотрите, можете ли вы теперь загружать обновления через каталог Центра обновления Windows.
5. Если исправление прошло успешно и вы смогли завершить установку ожидающего обновления через каталог Центра обновления Windows, вы можете снова включить Internet Explorer 11, перепроектировав приведенные выше инструкции.

Если этот метод не помог в вашем случае, перейдите к следующему потенциальному исправлению ниже.

4. Выполните ремонтную установку / чистую установку.

Если ни один из вышеперечисленных методов не помог вам, очень вероятно, что вы имеете дело с каким-либо типом повреждения базового системного файла, которое возникает на вашем компьютере из-за установления соединения с каталогом Центра обновления Windows.

В этом случае единственное, что вы можете сделать на этом этапе (кроме запроса специализированной помощи), — это сбросить все соответствующие компоненты ОС, связанные с вашей текущей установкой Windows.

И когда дело доходит до этого, есть два разных метода, которые позволят вам это сделать:

• Восстановительная установка — это лучший способ сбросить все соответствующие компоненты Windows, потому что он позволяет вам делать это, не касаясь каких-либо ваших личных файлов, находящихся на диске ОС. Но имейте в виду, что основным недостатком является то, что эта процедура довольно утомительна, и вам потребуется использовать совместимый установочный носитель для выполнения этой операции.
• Чистая установка — это самая простая процедура, потому что ее можно запустить непосредственно из меню графического интерфейса вашей установки Windows 10. Но имейте в виду, что если вам не удастся заранее создать резервную копию своих данных, вы можете потерять все личные данные на диске ОС (приложения, игры, личные носители, документы и т. Д.).

Если чистая установка или ремонтная установка недоступны, перейдите к следующему потенциальному исправлению ниже, чтобы узнать, как вы можете связаться с агентом Microsoft LIVE.

5. Обратитесь в службу поддержки Microsoft.

Если ни один из вышеперечисленных методов не помог в вашем случае, последний способ устранения неполадок, который вам следует изучить, — это связаться с агентом поддержки Microsoft и попросить их решить проблему за вас.

Поскольку проблема затрагивает Центр обновления Windows, вам будет назначен эксперт WU, который будет удаленно управлять вашим компьютером и выполнять ряд действий по устранению неполадок, направленных на выявление и устранение ошибки 8ddd0020 с помощью Центра обновления Windows.

Есть несколько способов связаться с агентом Microsoft, но самый быстрый и простой способ получить помощь — это позвонить по бесплатному номеру инструмента, соответствующему вашей стране проживания.

Вот официальный список бесплатных номеров службы поддержки Microsoft.

Позвонив по соответствующему бесплатному номеру службы поддержки Microsoft

Примечание. Имейте в виду, что в зависимости от региона и количества доступных агентов поддержки может пройти некоторое время, прежде чем вас назначат агенту поддержки. Скорее всего, вам зададут ряд вопросов безопасности, которые подтвердят, являетесь ли вы владельцем лицензии.

Код ошибки Десятичный код ошибки Строковое представление ошибки Описание 0x00000000 -4294967296 Success 0x00000001 -4294967295 ERROR_INVALID_FUNCTION 0x0000007B -4294967173 Error_Invalid_Name The filename, directory name,or volume label syntax is incorrect 0x00000275 -4294966667 Error_cant_enable_Deny_only A group marked use for deny only can not be enabled 0x0000041D -4294966243 ERROR_SERVICE_REQUEST_TIMEOUT The service did not respond to the start or control request in a timely fashion. 0x000004C3 -4294966077 Error_Session_Credential_Conflict Multiple connections to a server or shared resource by the same user,using more than one user name, are not allowed. 0x000004C5 -4294966075 Error_Dup_Domainename The workgroup or domain name is already in use by another computer on the network. 0x000005D5 -4294965803 NULL 0x00000619 -4294965735 error_Invalid_HW_Profile The specified hardware profile configuration is invalid 0x00000641 -4294965695 Error_Install_Service_failure The Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode, or if the Windows Installer is not correctly installed. 0x00000643 -4294965693 ERROR_INSTALL_FAILURE Fatal error during installation 0x00000652 -4294965678 ERROR_INSTALL_ALREADY_RUNNING Another installation is already in progress. Complete that installation before proceeding with this install. 0x000006D9 -4294965543 EPT_S_Not_Registered There are no more endpoints available from the endpoint mapper. 0x000006F6 -4294965514 RPC_X_BYTE_Count_TOO_Small The byte count is too small 0x00000963 -4294964893 NERR_BADPasswordCore This share name or password is invalid 0x00000BC2 -4294964286 Error_Success_Reboot_Required 0x00000C0B -4294964213 NULL 0x00000CC4 -4294964028 NULL 0x00000D47 -4294963897 NULL 0x00000E5C -4294963620 NULL 0x00000E74 -4294963596 NULL 0x0000109F -4294963041 NULL 0x00001112 -4294962926 Error_No_Media_In_Drive No media in drive 0x0000117A -4294962822 NULL 0x00001190 -4294962800 Error_Shutdown_IS_Scheduled A system shutdown has already been scheduled 0x00001234 -4294962636 Error_Port_Unreachable No Service is operating at the destination network endpoint on the remote system 0x00001396 -4294962282 Error_Wrong_Target_Name Logon failure: The target account name is incorrect. 0x000013D7 -4294962217 Error_Cluster_restype_Note_Supported The specified node does not support a resource of this type. This amy be due to version inconsistancies or due to the absence of the resource DLL on this node. 0x00001449 -4294962103 Error_Invalid_Showwin_Command Cannot show or remove the window in the way specified 0x00001633 -4294961613 NULL 0x000017C7 -4294961209 NULL 0x000017D2 -4294961198 NULL 0x000018BE -4294960962 NULL 0x00001AD4 -4294960428 NULL 0x00001ADA -4294960422 NULL 0x00001C70 -4294960016 NULL 0x00001CE8 -4294959896 NULL 0x00001D7A -4294959750 NULL 0x00001F1D -4294959331 NULL 0x00001F59 -4294959271 NULL 0x00002075 -4294958987 NULL 0x0000229A -4294958438 NULL 0x000022CA -4294958390 NULL 0x0000230B -4294958325 NULL 0x00002685 -4294957435 NULL 0x000028A5 -4294956891 NULL 0x00002ABF -4294956353 NULL 0x00002BBE -4294956098 NULL 0x00002D49 -4294955703 NULL 0x00002DA4 -4294955612 NULL 0x00002DDC -4294955556 NULL 0x00002EBD -4294955331 NULL 0x00002ED7 -4294955305 NULL 0x000032D8 -4294954280 NULL 0x000035DD -4294953507 NULL 0x000036F8 -4294953224 NULL 0x000037A1 -4294953055 NULL 0x000037FA -4294952966 NULL 0x0000384E -4294952882 NULL 0x000038F5 -4294952715 NULL 0x0000399D -4294952547 NULL 0x00003A5C -4294952356 NULL 0x00003D16 -4294951658 NULL 0x00003E44 -4294951356 NULL 0x00004016 -4294950890 NULL 0x000040CF -4294950705 NULL 0x00004146 -4294950586 NULL 0x000041F4 -4294950412 NULL 0x0000433D -4294950083 NULL 0x000043F9 -4294949895 NULL 0x000044CC -4294949684 NULL 0x0000471E -4294949090 NULL 0x00004808 -4294948856 NULL 0x00004910 -4294948592 NULL 0x00004966 -4294948506 NULL 0x00004A65 -4294948251 NULL 0x00004BF9 -4294947847 NULL 0x00004CC2 -4294947646 NULL 0x00004D2D -4294947539 NULL 0x00004DB8 -4294947400 NULL 0x00004E90 -4294947184 NULL 0x00004FA2 -4294946910 NULL 0x00005112 -4294946542 NULL 0x000051CF -4294946353 NULL 0x00005249 -4294946231 NULL 0x00005299 -4294946151 NULL 0x0000530C -4294946036 NULL 0x000053C4 -4294945852 NULL 0x00005492 -4294945646 NULL 0x00005542 -4294945470 NULL 0x0000556E -4294945426 NULL 0x000055BC -4294945348 NULL 0x00005636 -4294945226 NULL 0x00005812 -4294944750 NULL 0x00005844 -4294944700 NULL 0x000058F7 -4294944521 NULL 0x00005A6A -4294944150 NULL 0x00005AA5 -4294944091 NULL 0x00005C0E -4294943730 NULL 0x00005FE9 -4294942743 NULL 0x00006056 -4294942634 NULL 0x0000626E -4294942098 NULL 0x000062B6 -4294942026 NULL 0x0000651F -4294941409 NULL 0x000065AA -4294941270 NULL 0x000065BA -4294941254 NULL 0x00006F50 -4294938800 NULL 0x00007052 -4294938542 NULL 0x00007190 -4294938224 NULL 0x00007617 -4294937065 NULL 0x00007747 -4294936761 NULL 0x00007865 -4294936475 NULL 0x00007B86 -4294935674 NULL 0x00007C12 -4294935534 NULL 0x00007C78 -4294935432 NULL 0x00007CE1 -4294935327 NULL 0x00007D12 -4294935278 NULL 0x00007DFF -4294935041 NULL 0x00007EC9 -4294934839 NULL 0x00007F83 -4294934653 NULL 0x00007FCC -4294934580 NULL 0x0000F06A -4294905750 NULL 0x0000F06B -4294905749 NULL 0x0000F0DA -4294905638 NULL 0x00240001 -4292607999 WU_S_SERVICE_STOP Service stopped 0x00240002 -4292607998 WU_S_SELFUPDATE Agent selfupdates 0x00240003 -4292607997 WU_S_UPDATE_ERROR Overall operation completed but error occurred while processing one or more specified updates. 0x00240004 -4292607996 WU_S_MARKED_FOR_DISCONNECT The caller attempted to disconnect an operation but the operation is busy calling back so the callback is marked for disconnect later 0x00240005 -4292607995 WU_S_REBOOT_REQUIRED The system needs to be rebooted to complete installation. 0x00240006 -4292607994 SUS_S_ALREADY_INSTALLED The update to be installed is already installed 0x00240007 -4292607993 WU_S_ALREADY_UNINSTALLED The update to be uninstalled is already not installed. 0x00240008 -4292607992 WU_S_ALREADY_DOWNLOADED The update to be downloaded is already downloaded 0x80000007 -2147483641 E_ABORT 0x80004001 -2147467263 E_NOTIMPL 0x80004002 -2147467262 E_Nointerface 0x80004003 -2147467261 E_Pointer Invalid pointer 0x80004004 -2147467260 E_ABORT Operation Aborted 0x80004005 -2147467259 E_Fail 0x80004015 -2147467243 CO_E_WRONG_SERVER_IDENTITY The security descriptor on the BITS service was changed by a security template such that NetworkService account doesn’t have READ access to BITS service. 0x8000FFFF -2147418113 E_UNEXPECTED 0x80010100 -2147417856 RPC_E_SYS_CALL_FAILED 0x80010105 -2147417851 RPC_E_Serverfault 0x80010108 -2147417848 RPC_E_Disconnected 0x80040154 -2147221164 REGDB_E_CLASSNOTREG BITS in Windows 2000 is dependent on SENS and EventSystem services. If COM+ catalog is corrupted, one of these errors was seen. 0x800401F3 -2147221005 CO_E_Classstring 0x800401FD -2147220995 CO_E_Objnotconnected Object is not connected to server 0x80040206 -2147220986 EVENT_E_INTERNALERROR There will be event messages in Application/System log regarding the errors. 0x80070001 -2147024895 ERROR_INVALID_FUNCTION 0x80070002 -2147024894 ERROR_FILE_NOT_FOUND The System cannot find the file specified 0x80070003 -2147024893 COR_E_DIRECTORYNOTFOUND The specified path couldn’t be found — ALLUSERSPROFILE Microsoft network dir doesn’t exist 0x80070005 -2147024891 ERROR_ACCESS_DENIED The authentication method is not supported. — CoCreateInstance(IBackgroundCopyManager) fails with E_ACCESSDENIED (0x80070005) in this condition 0x80070006 -2147024890 E_Handle Handle not valid error 0x80070008 -2147024888 ERROR_NOT_ENOUGH_MEMORY The system is out of memory. 0x8007000B -2147024885 COR_E_BADIMAGEFORMAT The format of the DLL or executable being loaded is invalid 0x8007000D -2147024883 Error_invalid_data 0x8007000E -2147024882 E_OUTOFMEMORY 0x80070017 -2147024873 ERROR_CRC Data error (cyclic redundancy check). 0x8007001F -2147024865 ERROR_GEN_FAILURE A device attached to the system is not functioning 0x80070020 -2147024864 STIERR_SHARING_VIOLATION The process cannot access the file because it is being used by another process 0x80070032 -2147024846 ERROR_NOT_SUPPORTED 0x80070050 -2147024816 ERROR_FILE_EXISTS 0x80070052 -2147024814 ERROR_CANNOT_MAKE The directory or file cannot be created 0x80070057 -2147024809 ERROR_INVALID_PARAMENTER — E_INVALIDARG One or more arguments are not valid error — Invalid proxy server name was specified in the user’s IE settings and hence WinhttpSetProxySettings call fails with E_INVALIDARG error. BITS puts the job in TRANSIENT_ERROR with the same error code. For ex, if the proxy server is set to http://foo/bar/proxy.pac, this error will be seen. This error is also seen when credentials are supplied such that scheme is not NTLM/Negotiate, but username/password is NULL, since that is not valid (WinhttpSetCredentials fails with E_INVALIDARG. BITS 1.5 puts the job into ERROR state with BG_E_INVALID_RESPONSE in the above 2 cases, because of error code mapping E_INVALIDARG is always mapped to (BG_E_INVALID_SERVER_RESPONSE) 0x80070070 -2147024784 ERROR_DISK_FULL There is not enough space on the disk 0x8007007A -2147024774 ERROR_INSUFFICIENT_BUFFER 0x8007007B -2147024773 STIERR_INVALID_DEVICE_NAME 0x8007007E -2147024770 ERROR_MOD_NOT_FOUND The specified module could not be found. 0x8007007F -2147024769 ERROR_PROC_NOT_FOUND The specified procedure could not be found. 0x80070080 -2147024768 ERROR_WAIT_NO_CHILDREN There are no child processes to wait for 0x800700A1 -2147024735 ERROR_BAD_PATHNAME 0x800700B6 -2147024714 ERROR_INVALID_ORDINAL 0x800700C1 -2147024703 ERROR_BAD_EXE_FORMAT is not a valid Win32 application 0x800700E7 -2147024665 Error_Pipe_Busy All pipe instances are busy 0x80070103 -2147024637 ERROR_NO_MORE_ITEMS: 0x8007010B -2147024629 ERROR_DIRECTORY The directory name is invalid 0x8007012E -2147024594 Error_Disk_Too_Fragmented 0x800701E7 -2147024409 Error_Invalid_Address 0x800703e3 -2147023901 Error_Operation_Aborted The I/O operation has been aborted because of either a thread exit or an application request 0x800703e5 -2147023899 ERROR_IO_PENDING 0x800703E6 -2147023898 Error_Noaccess to memory location Invalid access to memory location 0x800703E7 -2147023897 Error_Swaperror Error performing inpage operation 0x800703EB -2147023893 Error_Can_Not_Complete Cannot complete this function 0x800703Ed -2147023891 ERROR_UNRECOGNIZED_VOLUME The volume does not contain a recognized file system 0x800703F0 -2147023888 ERROR_NO_TOKEN An attempt was made to reference a token that does not exist 0x8007041D -2147023843 ERROR_SERVICE_REQUEST_TIMEOUT The service did not respond to the start or control request in a timely fashion 0x8007041E -2147023842 Error_Service_No_Thread A thread could not be created for this service 0x8007041F -2147023841 ERROR_SERVICE_DATABASE_LOCKED The service database is locked 0x80070422 -2147023838 ERROR_SERVICE_DISABLED The service cannot be started. If BITS service is disabled by the Administrator, then this error will be seen. 0x80070424 -2147023836 ERROR_SERVICE_DOES_NOT_EXIST Due to a bug in BITS 1.5 OOB setup, after BITS 1.5 install, the BITS service is deleted, but the 1.5 install returns success code. BITS 1.5 binaries are copied to the machine, but the service doesn’t exist. This can also happen if the BITS service is explicitly deleted by running the command sc delete bits 0x80070426 -2147023834 ERROR_SERVICE_NOT_ACTIVE The service has not been started 0x8007042B -2147023829 ERROR_PROCESS_ABORTED 0x8007042C -2147023828 Error_Service_Dependency_Fail 0x80070433 -2147023821 ERROR_SERVICE_DEPENDENCY_DELETED BITS service has a dependency on lanmanworkstation service in BITS 1.0 and 1.2. If “Client for Microsoft networks” network component is uninstalled, then lanmanworkstation service is deleted, but BITS dependency will still be present. After that, BITS service fails to start 0x80070437 -2147023817 Error_Different_Service_Account 0x8007043B -2147023813 ERROR_SERVICE_NOT_IN_EXE The executable program that this service is configured to run does not implement the service. netsvcs registry value in HKLMSoftwareMicrosoftWindowsNTCurrentVersionSvchost registry key should contain the service names that can be run in that service host. On XP and Windows 2003, BITS should be in this value. If “BITS” is missing from that value, then ERROR_SERVICE_NOT_IN_EXE error is seen when attempting to start the service 0x8007045A -2147023782 ERROR_DLL_INIT_FAILED 0x8007045B -2147023781 ERROR_SHUTDOWN_IN_PROGRESS 0x80070490 -2147023728 E_PROP_ID_UNSUPPORTED Permission denied / [Problem initializing or using session variables] or Element not found 0x800704C7 -2147023673 ERROR_CANCELLED Cancelled by user 0x800704DD -2147023651 Error_Not_Logged_On to network 0x80070502 -2147023614 Error_Stack_Buffer_Overrun The system detected an overrun of a stack-based buffer in this application 0x80070570 -2147023504 ERROR_FILE_CORRUPT 0x8007057F -2147023489 Error_Cannot_Find_WND_Class Cannot find windows class 0x8007058D -2147023475 Error_Control_ID_Not_Found 0x800705AA -2147023446 ERROR_NO_SYSTEM_RESOURCE Insufficient system resources exist to complete the requested service 0x800705AD -2147023443 Error_Working_Set_Quota Insufficient quota to complete the requested service 0x800705AF -2147023441 ERROR_COMMITMENT_LIMIT The paging file is too small for this operation to complete 0x800705B4 -2147023436 Error_Timeout 0x80070643 -2147023293 ERROR_INSTALL_FAILURE 0x80070652 -2147023278 ERROR_INSTALL_ALREADY_RUNNING ErrorClientUpdateInProgress 0x8007066A -2147023254 Error_Patch_Target_Not_Found The program to be upgraded may be missing or the patch may upgrade a different version of the program 0x800706A6 -2147023194 RPC_S_Invalid_Binding Terminal Services optional component is installed on the machine, but the “Terminal Services” service has been disabled. 0x800706B5 -2147023179 RPC_S_Unknown_IF Eventlog service is not running. BITS tries to initialize the event logger object during initialization and fails to start, if the initialization fails. If event log service is not running, then the initialization fails with RPC_S_UNKNOWN_IF error 0x800706BA -2147023174 RPC_S_SERVER_UNAVAILABLE 0x800706BB -2147023173 RPC_S_SERVER_TOO_BUSY The RPC server is too busy to complete this operation 0x800706BE -2147023170 RPC_S_CALL_FAILED 0x800706BF -2147023169 PRC_S_Call_Failed_DNE 0x800706C6 -2147023162 RPC_S_Invalid_Bound The array bounds are invalid 0x800706F7 -2147023113 RPC_X_Bad_Stub_Data This can occur after a control selfupdate that has not fully completed and requires a reboot. The controls may need to be reregistered. 0x80070704 -2147023100 Error_Unknown_Port 0x80070BC2 -2147021886 ErrorControlRebootRequired 0x8007276b -2147014805 WSASYSNOTREADY The description of WSASYSNOTREADY says WSAStartup cannot function at this time because the underlying system it uses to provide network services is currently unavailable. It seems that something is wrong with networking components on the system. 0x8007277B -2147014789 WSASYSCALLFAILURE A system call that should never fail has failed 0x80072AF9 -2147013895 WSAHOST_NOT_FOUND 0x80072AFC -2147013892 WSANO_DATA 0x80072EE2 -2147012894 ERROR_INTERNET_TIMEOUT The request has timed out. 0x80072EE4 -2147012892 ERROR_INTERNET_INTERNAL_ERROR An internal error has occurred. 0x80072EE5 -2147012891 Error_Internet_Invalid_URL 0x80072EE6 -2147012890 ERROR_INTERNET_UNRECOGNIZED_SCHEME The URL scheme could not be recognized or is not supported. 0x80072EE7 -2147012889 ERROR_INTERNET_NAME_NOT_RESOLVED The server name could not be resolved. 0x80072EEF -2147012881 ERROR_INTERNET_LOGIN_FAILURE 0x80072EF1 -2147012879 ERROR_INTERNET_OPERATION_CANCELLED 0x80072EF2 -2147012878 Error_Internet_Incorrect_handle_type 0x80072EF3 -2147012877 Error_Internet_Incorrect_Handle_State 0x80072EFD -2147012867 ERROR_INTERNET_CANNOT_CONNECT The attempt to connect to the server failed. 0x80072EFE -2147012866 ERROR_INTERNET_CONNECTION_ABORTED The connection with the server has been terminated. 0x80072F0C -2147012852 Error_Internet_Client_Auth_Cert_Needed 0x80072F0D -2147012851 ERROR_INTERNET_INVALID_CA 0x80072F76 -2147012746 ERROR_HTTP_HEADER_NOT_FOUND The requested header could not be located 0x80072F78 -2147012744 ERROR_HTTP_INVALID_SERVER_RESPONSE The server response could not be parsed. 0x80072F7c -2147012740 ERROR_HTTP_REDIRECT_FAILED 0x80072F83 -2147012733 ERROR_INTERNET_DISCONNECTED 0x80072F8c -2147012724 ERROR_INTERNET_NOT_INITIALIZED 0x80072F8F -2147012721 ERROR_INTERNET_SECURE_FAILURE ErrorClockWrong One or more errors were found in the Secure Sockets Layer (SSL) certificate sent by the server. 0x800736B1 -2147010895 Error_SXS_Cant_gen_Actctx This application has failed to start because the application configuration is incorrect. 0x8007F001 -2146963455 STATUS_FAILED_LANGUAGE_TYPE Setup cannot update your files because the languageinstalled on your system is different from the update language. 0x8007F002 -2146963454 STATUS_CHECKED_FREE_MISMATCH Setup cannot update a checked (debug) system with a free (retail) version of , or vice versa. 0x8007F003 -2146963453 STATUS_NOT_ENOUGH_SPACE There is not enough disk space on to install . Setup requires a minimum of d additional megabytes of free space or if you also want to archive the files for uninstall, Setup requires d additional megabytes of free space. Free additional sp 0x8007F004 -2146963452 STATUS_INSUFFICIENT_PRIVS You do not have permission to update . Please contact your system administrator. 0x8007F007 -2146963449 STATUS_CANT_FIND_INF Setup could not find the update.inf file needed to update your system. 0x8007F008 -2146963448 STATUS_UPDATE_SUCCESSFUL has been updated. Remove any disks from the floppy disk drives and choose OK to restart your computer. If you change or add any components to your system, you will need to reapply the Hotfix. 0x8007F009 -2146963447 STATUS_UPDATE_UNSUCCESSFUL installation did not complete. 0x8007F00a -2146963446 STATUS_SHUTDOWN_UNSUCCESSFUL Setup was unable to shutdown system. Please shutdown your system manually. 0x8007F00B -2146963445 STATUS_FILE_NOT_FOUND_IN_SETUP_LOG Could not locate entry for HAL.DLL in SETUP.LOG to determine type of HAL to update. 0x8007F00C -2146963444 STATUS_INVALID_INF_FILE The file is not correct. 0x8007F00d -2146963443 STATUS_USER_CANCELLED Setup canceled. 0x8007F00E -2146963442 STATUS_PLATFORM_MISMATCH This is for a different hardware platform. 0x8007F00f -2146963441 STR_CAPTION Setup 0x8007F010 -2146963440 STR_WARNCAPTION Setup Warning 0x8007F011 -2146963439 STR_ERRCAPTION Setup Error 0x8007F012 -2146963438 STR_FAILED_TO_DELETE_OR_RENAME The file is open or in use by another application. Close all other applications and then click Retry. 0x8007F013 -2146963437 STR_FAILED_TO_SAVE_REGISTRY Setup could not backup registry key to file 0x8007F014 -2146963436 STR_FAILED_TO_READ_REGISTRY Setup could not backup registry value 0x8007F015 -2146963435 STR_ASK_DIRTY_UNINSTALL Select »OK» to undo the changes that have been made, or select »Cancel» to quit. If you select »Cancel», your system will be left in a partially updated state and may not work correctly. 0x8007F016 -2146963434 STR_LEAVING_DIRTY has been partially updated and may not work properly. 0x8007F017 -2146963433 STR_ARE_YOU_SURE_CANCEL Are you sure you want to cancel? 0x8007F018 -2146963432 STR_SOURCE_MEDIA_NAME_UNINSTALL Uninstall Directory 0x8007F019 -2146963431 STR_SOURCE_MEDIA_NAME Uninstall Directory 0x8007F01a -2146963430 STR_SOURCE_MEDIA_NAME_SYSTEM System Files 0x8007F01b -2146963429 STR_INST_HOTFIX Setup found hotfixes on your system. Would you like to install these hotfixes now? 0x8007F01c -2146963428 STR_UNINST_ALREADY_CREATED You have already created an Uninstall directory. Doing this again will overwrite your current uninstall directory. Are you sure you want to do this? 0x8007F01d -2146963427 STR_OEM_FILE Your computer vendor installed this file on your computer. Do you want Setup to replace this file? 0x8007F01e -2146963426 STR_CATALOG_INSTALL_FAILED Failed to install catalog files. 0x8007F01f -2146963425 STR_ADD_REGISTRY_FAILED Failed to add registry entry. 0x8007f020 -2146963424 STATUS_BUILD_VERSION_MISMATCH Setup has detected that the build version of the system installed does not match the update you are applying to it. You can only install this update only on Build %d . 0x8007f021 -2146963423 STATUS_SP_VERSION_GREATER The version of Windows you have installed does not match the update you are trying to install. 0x8007f022 -2146963422 STATUS_CANT_SPAWN_HOTFIX Setup could not start the hotfix installation program. 0x8007f023 -2146963421 STATUS_CANT_FIND_TAG Setup could not locate the files. 0x8007f024 -2146963420 STATUS_OVERWRITE_UNINSTALL WARNING: You have chosen to overwrite your existing uninstall: If you continue, you will only be able to uninstall to the following Service Pack version: Are you sure you want to continue? Click Yes to continue creating the 0x8007f026 -2146963418 STATUS_WININET_LOAD_FAILED This Web-based update requires Internet Explorer 3.0 or later. For instructions on how to download a version of this update that does not require a Web connection during installation, download and install from http://www.Microsoft.com/Downloads 0x8007f027 -2146963417 STATUS_CANT_INSTALL_SP_ON_DTC This has not been qualified by your hardware vendor for installation on this copy of Datacenter Server. Please contact your hardware vendor for additional information on obtaining a that has been qualified for your system configuration. 0x8007f028 -2146963416 STATUS_NECESSARY_FILES_NOT_PRESENT Not all files necessary to perform an integrated installation are present. 0x8007f029 -2146963415 STATUS_SPOOLER_NOT_STARTED Cannot install . The Print Spooler service is not started. 0x8007f02a -2146963414 STATUS_MUST_RESTART_FIRST The system must be restarted before installing the , to allow some prior file update operations to complete. (These operations were previously scheduled by some other install or uninstall operation.) 0x8007f02b -2146963413 STATUS_NOT_ENOUGH_WITH_UNINST You do not have enough free disk space on % to archive the uninstall files. To install with backup files for uninstall, an additional dMB is required. 0x8007f02c -2146963412 STATUS_CANT_FIND_RSAENHS Unable to locate RSAENHS.DLL in the update directory, high encryption for uninstall aborted. 0x8007f02d -2146963411 STATUS_CANT_FIND_ENCININF Unable to locate UPDENCIN.INF in the update directory, high encryption for uninstall aborted. 0x8007f02e -2146963410 STATUS_CANT_FIND_ENCTSINF Unable to locate UPDENCTS.INF in the update directory, unable to export TS files. 0x8007f02f -2146963409 STATUS_ENCINST_PROCESS_FAILED High encryption ENCINST process failed. 0x8007f030 -2146963408 STATUS_ENCINST_UPGRADE_FAILED High encryption upgrade failed. 0x8007f031 -2146963407 STR_USAGE_UPDATE AVAILABLE SWITCHES: [/help] [/quiet] [/passive] [/uninstall] [/norestart] [/forcerestart] [/l] [/n] [/o] [/f] [/integrate:<path>] [/d:<path>] /help Displays this message SETUP MODES /quiet Quiet mode (no user interaction or displ 0x8007f032 -2146963406 STR_BUILDING_CAB Creating file 0x8007f033 -2146963405 STR_DOWNLOADING Downloading files and patches 0x8007f034 -2146963404 STR_ARCHIVING_FILES Backing up files 0x8007f035 -2146963403 STR_ARCHIVING_FILE Backing up files 0x8007f036 -2146963402 STR_INSTALLING_FILES Installing files 0x8007f037 -2146963401 STR_INSTALLING_FILE Installing files 0x8007f038 -2146963400 STR_FINISHING_INSTALL Finishing installation 0x8007f039 -2146963399 STR_WELCOME_LINE Welcome to the Setup Wizard 0x8007f03a -2146963398 STR_RESTART &Restart 0x8007f03b -2146963397 STR_COMPLETE installation is complete. You must restart your computer for the update to take effect. 0x8007f03d -2146963395 STR_CANT_CANCEL_NOW Please wait while Setup updates your system files. 0x8007f03e -2146963394 STR_MUST_ACCEPT_TIP Must accept license agreement before installing 0x8007f03f -2146963393 STR_NEED_TO_CONNECT Setup needs to connect to the internet now to download files and patches for installation. 0x8007f040 -2146963392 STR_READY_TO_REPLACE Setup is ready to begin replacing system files. 0x8007f041 -2146963391 STR_CONNECTING Connecting to 0x8007f042 -2146963390 STR_CONNECTED Connected to 0x8007f043 -2146963389 STR_ESTIMATE estimate 0x8007f044 -2146963388 STR_MINUTES minutes 0x8007f045 -2146963387 STR_SECONDS seconds 0x8007f046 -2146963386 STR_DOWNLOAD_REMAINING KB remaining 0x8007f047 -2146963385 STR_DOWNLOAD_COMPLETE Download complete 0x8007f048 -2146963384 STR_DOWNLOAD_UNPACKING Download complete, now unpacking files 0x8007f049 -2146963383 STR_DOWNLOAD_FAILURE The following error occurred while Setup attempted to download the files from the Internet: 0x8007f04a -2146963382 STR_UNKNOWN_ERROR The server did not respond (error code %d). 0x8007f04b -2146963381 STR_INTERNET_TIMEOUT The server did not respond. 0x8007f04c -2146963380 STR_DOWNLOAD_RETRY_TEXT If this error persists after you have clicked Retry several times, download and install from http://www.Microsoft.com/Downloads. This will give you instructions on how to download a version of this update that does not require a Web connection during 0x8007f04d -2146963379 STR_HASH_FAILURE_1 Setup determined that the following downloaded file is corrupt: 0x8007f04e -2146963378 STR_HASH_FAILURE_2 Setup determined that the following downloaded files are corrupt: 0x8007f04f -2146963377 STR_DOWNLOAD_GIVE_UP Setup was unable to download all the files necessary for installation. 0x8007f050 -2146963376 STR_COPYING_FILE_DELAYED Copied file (delayed) 0x8007f051 -2146963375 STR_ERROR_COPY_SLIP An error has occurred copying files from the Service Pack share to the distribution share. 0x8007f052 -2146963374 STR_SLIPSTREAM_SUCCESSFUL Integrated install has completed successfully. 0x8007f053 -2146963373 STR_SLIPSTREAM_FAILED Failed to copy some or all of the files necessary for integrated install. Please check that: a) No network or copy errors occurred during the integration process b) The format of the destination directory is correct. The files to be integrated 0x8007f054 -2146963372 STR_SVCPACK_CMD Service Pack started with following command line 0x8007f055 -2146963371 STR_DOWNLOAD_SIZE bytes downloaded. 0x8007f056 -2146963370 STR_NO_SVCPACK No Service Pack 0x8007f057 -2146963369 STR_MISSING_FILE The file is missing from the installation. The file must be present for Setup to continue. Press OK to cancel Setup. 0x8007f058 -2146963368 STR_READY_TO_ENCINST Setup is ready to begin upgrade of uninstall to high encryption. 0x8007f059 -2146963367 STR_SLIPSTREAM_LANGUAGE_MISMATCH Integrated install failed. The language type or platform for the destination directory and must be the same. 0x8007f05a -2146963366 STATUS_CANT_OPEN_LOG Error opening file 0x8007f05b -2146963365 STR_SKIPPING_FILE Skipped copying file: 0x8007f05c -2146963364 STR_COPY_FILE Copying file 0x8007f05d -2146963363 STR_SVC_INFO In order to successfully complete this installation, the following services will automatically be stopped and re-started. 0x8007f05e -2146963362 STR_SVC_STOP_ERR Setup was unable to stop the following service 0x8007f05f -2146963361 STR_SVC_ASKREBOOT A reboot will probably be required in order to successfully complete this installation. Do you wish to continue? 0x8007f060 -2146963360 STR_SVC_START_ERR Setup was unable to re-start the following service: . 0x8007f061 -2146963359 ERR_STD_PREFIX Setup encountered an error: 0x8007f062 -2146963358 STR_COPYING_FILE Copied file: 0x8007f063 -2146963357 STR_SPAWNING_PROCESS Starting process: 0x8007f064 -2146963356 STATUS_INVALID_VER_FILE The update.ver file is not correct. 0x8007f065 -2146963355 STR_DOMESTIC_TAG1 US/Canada Only, Not for Export 0x8007f066 -2146963354 STR_DOMESTIC_TAG2 Domestic Use Only 0x8007f067 -2146963353 STR_DOMESTIC_TAG3 US and Canada Use Only 0x8007f06a -2146963350 STATUS_SP_VERSION_GREATER_1 Setup has detected that the Service Pack version of the system installed is newer than the update you are applying to it. You can only install this update on Service Pack. 0x8007f06b -2146963349 STATUS_SP_VERSION_GREATER_2 Setup has detected that the Service Pack version of this system is newer than the update you are applying. There is no need to install this update. 0x8007f06c -2146963348 STATUS_FPNW_FIXUP_FAILED Setup failed to access or correctly modify your SETUP.LOG file. 0x8007f06d -2146963347 STATUS_WRONG_PLATFORM The version of software you are running does not match the system you are running it on. 0x8007f06e -2146963346 STATUS_FAILURE_COPYING_FILES Failed to completely copy all of the updated files. 0x8007f06f -2146963345 STATUS_FAILED_TO_SET_DIR Failed to set the directory. 0x8007f070 -2146963344 STATUS_SETUP_ERROR An error in updating your system has occurred. 0x8007f075 -2146963339 STATUS_SUCCESS_NOREBOOT has been updated. You must reboot for these changes to take effect. If you change or add any components to your system, you will need to reapply the Hotfix. 0x8007f076 -2146963338 STATUS_SP_VERSION_LESSER Setup has detected that the version of the Service Pack installed on your system is lower than what is necessary to apply this hotfix. At minimum, you must have Service Pack installed. 0x8007f078 -2146963336 STATUS_NO_UNINSTALL_AVAILABLE You cannot uninstall, since an uninstall for has not been created. 0x8007f07a -2146963334 STATUS_SUCCESS_NOREBOOTNEC has been updated. If you change or add any components to your system, you will need to reapply the Hotfix. 0x8007f07b -2146963333 STATUS_UNINST_NOREBOOTNEC Hotfix successfully uninstalled. 0x8007f07c -2146963332 STR_SECURITY_PROVIDER_WARNING The existing file contains High Encryption security, but the updated Hotfix file contains only Standard Encryption security. You can choose to replace the High Encryption security file with the updated Standard Encryption security file now. 0x8007f07f -2146963329 STR_UNINST_HOTFIX Hotfixes have been found on your system. Would you like to Uninstall these hotfixes now? 0x8007f080 -2146963328 STR_OLD_UNINST_EXISTS An old Uninstall directory has been found. Would you like to overwrite this directory with new Uninstall information? 0x8007f081 -2146963327 STR_LICENSE_DECLINED You have chosen to decline the License Agreement. Setup cannot continue. 0x8007f082 -2146963326 STR_NO_LICENSE_TXT No LICENSE.TXT file was found in your Hotfix directory. Setup cannot continue. 0x8007f083 -2146963325 STR_INSUFF_RESOURCES Insufficient resources are available. Setup cannot continue. 0x8007f084 -2146963324 STR_FILE_READ_ERROR Error reading LICENSE.TXT file. Setup cannot continue. 0x8007f085 -2146963323 STR_DELETE_OLD_UNINST This old uninstall directory cannot be used to uninstall this Hotfix, and should be deleted. Would you like to delete it now? 0x8007f086 -2146963322 STR_HOTFIXES_FOUND The following hotfixes are installed: 0x8007f087 -2146963321 STR_HOTFIXES_NOT_FOUND No Hotfixes are installed. 0x8007f088 -2146963320 STR_CAT_VERSIONS_EQUAL Catalog file versions are equal, although catalog files differ. Install package must be rebuilt. Failed to install catalog file. 0x8007f089 -2146963319 STR_WINDOWS_TYPE1 Windows NT 4.0 0x8007f08a -2146963318 STR_WINDOWS_TYPE2 Windows 2000 0x8007f08b -2146963317 STR_LICENSE_AGREEMENT License Agreement 0x8007f08c -2146963316 STR_SELECT_OPTIONS Select Options 0x8007f08d -2146963315 STR_UPDATING_YOUR_SYSTEM Updating Your System 0x8007f08e -2146963314 STR_WIZ1_STATIC3 Before you install this update, we recommend that you: — Update your system repair disk — Back up your system — Close all open programs To complete this installation, Windows might require restarting after you finish this wizard. 0x8007f08f -2146963313 STR_WIZ2_STATIC1 Please read the following license agreement. To continue with setup, you must accept the agreement. 0x8007f090 -2146963312 STR_WIZ2_RADIO1 I &Do Not Agree 0x8007f091 -2146963311 STR_WIZ2_RADIO2 I &Agree 0x8007f092 -2146963310 STR_ASK_BACKUP If you want to remove later, Setup must archive the necessary files. However, this requires significant disk space. Do you want Setup to archive these files? 0x8007f093 -2146963309 STR_ARCHIVE1 &Archive Files 0x8007f094 -2146963308 STR_ARCHIVE2 &Do Not Archive Files 0x8007f095 -2146963307 STR_WIZ4_STATIC2 Please wait while setup inspects your current configuration, archives your current files and updates your files. 0x8007f096 -2146963306 STR_WIZ4_STATIC_OPERATION Inspecting your current configuration 0x8007f097 -2146963305 STR_WIZ4_STATIC_DETAILS inspecting current configuration, archives your current files and updates your files 0x8007f098 -2146963304 STR_WIZ4_STATIC Inspecting current configuration, archives your current files and updates your files 0x8007f099 -2146963303 STR_WIZ5_STATIC1 Completing the Setup Wizard 0x8007f09a -2146963302 STR_WIZ5_STATIC2_REBOOT You have successfully completed the Setup Wizard. To apply the changes, the wizard has to restart Windows. To restart Windows automatically, click Finish. If you want to restart later, select the Do not restart now check box, and then click Fin 0x8007f09b -2146963301 STR_WIZ5_STATIC2_NOREBOOT You have successfully completed the Setup Wizard. To close this wizard, click Finish. 0x8007f09c -2146963300 STR_WIZ5_CHECK1 &Do not restart now 0x8007f09d -2146963299 STR_WIZCAPTION Setup Wizard 0x8007f09e -2146963298 STR_ANALYZE_DISK Checking for necessary space 0x8007f09f -2146963297 STR_BUILDING_CAB_CAPTION Creating Cabinets 0x8007f0a0 -2146963296 STR_CLEAN_REG Updating the registry keys 0x8007f0a1 -2146963295 STR_CANCEL Cancel 0x8007f0a2 -2146963294 STR_DOWNLOAD_UNPACKING_DETAILS Unpacking: %d remaining 0x8007f0a3 -2146963293 STR_NO No LICENSE.TXT file was found in your Hotfix directory. Setup cannot continue. ::No Uninstall directory: Setup is executing. Please wait for Setup to complete :No Service Pack 0x8007f0a4 -2146963292 STR_README Read Me:readmesp.htm 0x8007f0a5 -2146963291 STR_README_FILE readmesp.htm 0x8007f0a6 -2146963290 STR_SLIPSTREAM_EVAL_DESTINATION Integrated install failed. The destination directory contains an evaluation copy of Windows. 0x8007f0a7 -2146963289 STR_WINDOWS_TYPE3 Windows XP 0x8007f0a8 -2146963288 STR_NOUNINSTALL No Uninstall directory 0x8007f0a9 -2146963287 STR_SRVPACK Service Pack 0x8007f0aa -2146963286 STR_WINDOWS_TYPE0 Windows 0x8007f0ab -2146963285 STR_SPOOLER_ENABLE For Setup to continue, the print spooler service must be enabled on this computer. To enable this service, click OK. After Setup is complete, the print spooler will be disabled. 0x8007f0ac -2146963284 STR_USAGE_UPDATE_NOSLPSTRM AVAILABLE SWITCHES: [/help] [/quiet] [/passive] [/uninstall] [/norestart] [/forcerestart] [/l] [/n] [/o] [/f] [/integrate:<fullpath>] /help Displays this message SETUP MODES /quiet Quiet mode (no user interaction or display) 0x8007f0ad -2146963283 STR_FONT Verdana Bold 0x8007f0ae -2146963282 STR_CHOOSE_UNINST_DIR Select an existing folder or make a new folder in which to store uninstall information. 0x8007f0af -2146963281 STR_ARCHIVE_DRIVE_INVALID You have selected a folder that is not on your local computer. The current state of the computer can be archived only on your local computer. 0x8007f0b0 -2146963280 STR_STARTING_SERVICES Starting services 0x8007f0b1 -2146963279 STR_STARTING_SERVICE Starting service 0x8007f0b2 -2146963278 STR_STOPPING_SERVICES Stopping services 0x8007f0b3 -2146963277 STR_STOPPING_SERVICE Stopping services 0x8007f0b4 -2146963276 STR_WINDOWS_TYPE4 Windows Server 2003 0x8007f0c0 -2146963264 STR_BLOCKLIST_HF_MSG Setup cannot install this hotfix because one or more of its files are out of date. Please download and install the latest version of fix . 0x8007f0c1 -2146963263 STR_BLOCKLIST_SP_MSGA This service pack contains files that are missing some of the fixes which were previously installed on this computer. To prevent possible problems, these files will not be installed by the service pack. 0x8007f0c2 -2146963262 STR_BLOCKLIST_SP_MSGB In order to have the fixes contained in both the service pack and the previously installed hotfixes, you must obtain and install the updated versions of the following hotfixes prior to or following the service pack installation. These hotfixes are also 0x8007f0c3 -2146963261 STR_BLOCKLIST_SP_MSGC Do you want to continue installing this service pack? 0x8007f0c4 -2146963260 STR_BLOCKLIST_SP_MSGD The service pack install cannot continue until these hotfixes are applied to your system. 0x8007f0c5 -2146963259 STR_GENERALCAPTION 2% 0x8007f0c6 -2146963258 STATUS_BUILD_VERSION_MISMATCH2 Setup has detected that the build version of the system installed does not match the update you are applying to it. You can only install this update only on Build %d . 0x8007f0c7 -2146963257 STR_SLPSTRM_COPY Integrating files 0x8007f0c8 -2146963256 STR_SLPSTRM_WIZ4_STATIC2 Please wait while setup integrates files from Windows Service Pack into your Windows installation folder. 0x8007f0c9 -2146963255 STR_SLPSTRMUPDATING_YOUR_SYSTEM Updating Your Windows Share 0x8007f0ca -2146963254 STR_RESTORE_POINT_DESC Installed . 0x8007f0cb -2146963253 STATUS_VLK_BLOCKED The Product Key used to install Windows is invalid. Please contact your system administrator or retailer immediately to obtain a valid Product Key. You may also contact Microsoft Corporation’s Anti-Piracy Team by emailing [email protected] 0x8007f0cc -2146963252 STATUS_KERNEL_NONSTD The core system file (kernel) used to start this computer is not a Microsoft Windows file. The Service Pack will not be installed. For more information, see Knowledge Base article at http://support.microsoft.com. 0x8007f0cd -2146963251 STR_VLK_CHECK Checking product key 0x8007f0ce -2146963250 STR_SET_RESTOREPOINT Creating restore point 0x8007f0cf -2146963249 STR_PERFORM_INVENTORY Performing inventory 0x8007f0d0 -2146963248 STR_BUILD_THIRDPARTYDRIVERS Creating Third Party Driver List 0x8007f0d1 -2146963247 STR_DISK_USAGEFORINSTALL Estimating space for installation 0x8007f0d2 -2146963246 STR_DISK_USAGEFORUNINSTALL Estimating space for uninstallation 0x8007f0d3 -2146963245 STR_PROCESSES_BEFOREARCHIVE Running processes before install 0x8007f0d4 -2146963244 STR_REGISTRY_BACKUP Backing up registry 0x8007f0d5 -2146963243 STR_PROCESSES_AFTERINSTALL Running processes after install 0x8007f0d6 -2146963242 STR_PERFORM_CLEANUP Performing cleanup 0x8007f0d7 -2146963241 STR_OPTIONAL_EXCLUSIONWARNING Windows has detected that one or more protected files on your computer have been modified. The Service Pack contains updated versions of those files, which work to provide a stable environment for your programs. If you click Yes, the updated version 0x8007f0d8 -2146963240 STR_WIZ1_STATIC3_XP Before you install this update, we recommend that you: — Back up your system — Close all open programs To complete this installation, Windows might require restarting after you finish this wizard. 0x8007f0d9 -2146963239 STR_ARCHIVE_FOLDER_INVALID The folder name is longer than the limit of 226 bytes. Enter a shorter name. 0x8007f0da -2146963238 STR_FAILED_INF_INTEGRITY Setup could not verify the integrity of the file Update.inf. Make sure the Cryptographic service is running on this computer. 0x8007f0db -2146963237 STR_BLOCKLIST_FIXNUMBER Fix Number 0x8007f0dc -2146963236 STR_BLOCKLIST_FILENAME File Name 0x8007f0dd -2146963235 STR_BLOCKLIST_VERSION Version 0x8007f0de -2146963234 STR_WIZ4_NOARCHIVE Please wait while setup inspects your current configuration and updates your files. 0x8007f0df -2146963233 STATUS_SP_BUILD_TO_BUILD This Service Pack cannot be installed on top of the build currently installed on your computer. Cancel this installation process, uninstall your current build, then re-install this Service Pack. 0x8007f0e0 -2146963232 STR_UNABLE_TO_VERIFY Setup could not verify the integrity of one or more installed files. 0x8007f0e2 -2146963230 STR_ERR_PRINT_EULA Unable to print the END USER LICENSE AGREEMENT 0x8007f0e3 -2146963229 STR_WINDOWS_TYPE Windows, Windows NT 4.0, Windows 2000, Windows XP, Windows Server 2000, Windows XP Version 2003 0x8007f0e4 -2146963228 STATUS_WINDOWS_VERSION_NEWER The version of Windows you have installed is newer than the update you are trying to install. There is no need to install this update. 0x8007f0e5 -2146963227 STATUS_PACKAGE_NOT_APPLICABLE This package does not apply to the operating system you are running, and therefore cannot be installed. 0x8007f0e6 -2146963226 STR_SAFEMODE_INSTALL You are trying to install while the system is in safe mode. This is not recommended unless the system does not function in normal mode. 0x8007f0e7 -2146963225 STR_APPLYING_HOTPATCHES Applying Hotpatches 0x8007f0e8 -2146963224 STATUS_INVALID_BRANCHES_INF The branches.inf file is invalid. 0x8007f0e9 -2146963223 STATUS_INVALID_UPDATEBR_INF The updatebr.inf file is invalid. 0x8007f0ea -2146963222 STR_PACKAGE_MIGRATE_FAILED Failed to migrate dependent packages. 0x8007f0ec -2146963220 STR_PERFORM_MIGRATION Performing migration 0x8007f0ed -2146963219 STATUS_NO_BRANCH_AVAILABLE Required installation branch was not found in INF file. 0x8007f0ee -2146963218 STR_BLOCKLIST_PACKAGE Package 0x8007f0ef -2146963217 STR_MIGRATE_BLOCKLIST_MSG The installation cannot continue because the following packages might not be valid: 0x8007f0f0 -2146963216 STR_BRANCH_CAPTION Branch info 0x8007f0f1 -2146963215 STATUS_INCOMPARABLE_BRANCHES Files from the package are incompatible with files on your system. 0x8007f0f2 -2146963214 STR_MIGRATE_BLOCKLIST_REC Reinstall the packages listed above, and then install . 0x8007f0f3 -2146963213 STR_UNKNOWN_PACKAGE Unknown 0x8007f0f4 -2146963212 STATUS_PREREQUISITE_FAILED Setup cannot continue because one or more pre-requisites required to install failed. For More details check the Log File. Update.exe can throw this error when it starts to download if the computer is running under battery power (there may be a fix for this in the future). 0x8007f0f5 -2146963211 STR_WINDOWS_TYPE5 Windows XP Version 2003 0x8007F0F6 -2146963210 NULL 0x8007f0f7 -2146963209 STR_HFSLP_ERROR An error occurred while attempting to integrate this software update package. Verify that the architecture, language, and service pack level of this software update are valid for the target distribution folder. 0x8007f0f8 -2146963208 STR_HFSLP_EXPRESS Express software update packages cannot be integrated. To download a version of the fix that can be integrated, visit http://www.microsoft.com/downloads. 0x8007f0f9 -2146963207 STR_HFSLP_EXTRACTED Extracted packages cannot be integrated. The /integrate switch must be used with the original software update package. 0x8007f0fa -2146963206 STR_HFSLP_NOTFOUND Setup was unable to locate the distribution folder that you wish to integrate with this software update package. The /integrate switch requires the full path to the distribution folder. 0x8007f200 -2146962944 STATUS_MORE_FILES_FOR_DOWNLOAD More byte ranges required. 0x8007f201 -2146962943 STATUS_READY_TO_INSTALL Required payload available, ready to install. 0x8007f202 -2146962942 STATUS_PATCH_NOT_FOUND The delta was not found in the PSF. Update cannot find information about how to upgrade this binary. SUS can terminate installation. 0x8007f203 -2146962941 STATUS_PATCH_FILE_CORRUPT Update cannot find information about how to upgrade this binary 0x8007f204 -2146962940 STATUS_INDEXFILE_CORRUPT Index file does not have a valid signature. Index file has an invalid signature. The package is corrupt. SUS can terminate installation. 0x8007f205 -2146962939 STR_UPDATE_ALREADY_RUNNING Setup has detected that another update is in progress. Please complete that installation or removal and try again. 0x8007f206 -2146962938 STATUS_RETRY_REFRESH_INVENTORY The state of machine changed since last inventory analysis. Update.exe has to restart the process with /si. 0x8007f207 -2146962937 STATUS_RETRY_SELF_CONTAINED Two consecutive attempts to download delta failed without any progress and there is no use in continuing as express package. Revert to self-contained package. 0x8007f220 -2146962912 STATUS_CONTINUE_INVENTORY error codes should not be returned out of update.exe 0x8007f221 -2146962911 ERROR_INDEXFILE_NOT_FOUND error codes should not be returned out of update.exe 0x80080005 -2146959355 CO_E_Server_Exec_Failure 0x80080008 -2146959352 CO_E_SERVER_STOPPING 0x80090006 -2146893818 NTE_Bad_Signature 0x8009000B -2146893813 NTE_Bad_Key_State 0x80090017 -2146893801 NTE_PROV_TYPE_NOT_DEF 0x8009001D -2146893795 Error_Write_Fault 0x80090305 -2146893051 SEC_E_SECPKG_NOT_FOUND The requested security package does not exist 0x80090331 -2146893007 Sec_E_Algorithm_Mismatch The client and the server cannot communicate, because they do not possess a common algorithm 0x8009033F -2146892993 SEC_E_Shutdown_IN_Progress 0x80092003 -2146885629 CRYPT_E_File_Error An error occurred while reading or writing to a file 0x8009200D -2146885619 Crypt_E_Bad_Msg Not a cryptographic message or the cryptographic message is not formatted correctly 0x80092026 -2146885594 Crypt_E_Security_Settings The cryptographic operation failed due to a local security option setting 0x80096001 -2146869247 Trust_E_System_Error A system-level error occurred while verifying trust 0x80096005 -2146869243 Trust_E_Time_Stamp could not be verified 0x80096010 -2146869232 Trust_E_Bad_Digest The digital signature of the object did not verify 0x80096019 -2146869223 TRUST_E_BASIC_CONSTRAINTS 0x800A0046 -2146828218 CTL_PermissionDenied olectl.h 0x800a01ae -2146827858 IXP_NNTP_NO_SUCH_ARTICLE_FOUND This can occur after a control selfupdate that has not fully completed and requires a reboot. 0x800a138f -2146823281 ERROR_RESOURCE_NOT_FOUND Javascript runtime error 0x800B0001 -2146762751 Trust_E_Provider_Unknown 0x800B0002 -2146762750 Trust_E_ActionUnknown The trust verification action specified is not supported by the specified trust provider. 0x800B0003 -2146762749 TRUST_E_SUBJECT_FORM_UNKNOWN The form specified by the subject is not one supported or known by the specified trust provider 0x800B0004 -2146762748 TRUST_E_SUBJECT_NOT_TRUSTED The subject is not trusted for the specified action. 0x800B0100 -2146762496 TRUST_E_NOSIGNATURE No signature was present in the subject 0x800B0101 -2146762495 Cert_E_Expired Verifying against the current system clock or the timestamp in the signed file 0x800B0109 -2146762487 CERT_E_UNTRUSTEDROOT A certificate chain processed, but terminated in a root certificate which is not trusted by the trust provider 0x800b010d -2146762483 Cert_E_Untrustedtestroot The certification path terminates with the test root which is not trusted with the current policy settings 0x800B0110 -2146762480 CERT_E_WRONG_USAGE 0x800C0002 -2146697214 Inet_E_Invalid_URL 0x800F0101 -2146500351 SPAPI_E_Section_Not_Found The required section was not found in the INF 0x800F020B -2146500085 SPAPI_E_No_Such_Devinst device instance does not exist 0x800F0217 -2146500073 SPAPI_E_Bad_Service_Installsect A service installation section in this INF is invalid 0x800F022B -2146500053 SPAPI_E_DI_Dont_Install The class installer has denied the request to install or upgrade this device 0x800F022F -2146500049 SPAPI_E_No_Catalog_for_OEM_INF The third-party INF does not contain digital signature information 0x800F0244 -2146500028 SPAPI_E_Signature_Osattribure_Mismatch The software was tested for compliance on a different version of Windows and may not be compatible with this version 0x800FF8F0 -2146436880 NULL 0x800FFBBE -2146436162 NULL 0x800FFC02 -2146436094 NULL 0x800FFC0D -2146436083 NULL 0x80190064 -2145845148 BG_E_HTTP_ERROR_100 The request can be continued. 0x80190065 -2145845147 BG_E_HTTP_ERROR_101 The server switched protocols in an upgrade header. 0x801900C8 -2145845048 BG_E_HTTP_ERROR_200 The server’s response was not valid. The server was not following the defined protocol. Resume the job, and then Background Intelligent Transfer Service (BITS) will try again. 0x801900C9 -2145845047 BG_E_HTTP_ERROR_201 The request was fulfilled and resulted in the creation of a new resource. 0x801900CA -2145845046 BG_E_HTTP_ERROR_202 The request was accepted for processing, but the processing has not been completed yet. 0x801900CB -2145845045 BG_E_HTTP_ERROR_203 The returned metadata in the entity-header is not the definitive set available from the server of origin. 0x801900CC -2145845044 BG_E_HTTP_ERROR_204 The server has fulfilled the request, but there is no new information to send back. 0x801900CD -2145845043 BG_E_HTTP_ERROR_205 The server’s response was not valid. The server was not following the defined protocol. Resume the job, and then Background Intelligent Transfer Service (BITS) will try again. 0x801900CE -2145845042 BG_E_HTTP_ERROR_206 The server fulfilled the partial GET request for the resource. 0x8019012C -2145844948 BG_E_HTTP_ERROR_300 The server could not return the requested data. 0x8019012D -2145844947 BG_E_HTTP_ERROR_301 The requested resource was assigned to a new permanent Uniform Resource Identifier (URI), and any future references to this resource should use one of the returned URIs. 0x8019012E -2145844946 BG_E_HTTP_ERROR_302 The requested resource was assigned a different Uniform Resource Identifier (URI). This change is temporary. 0x8019012F -2145844945 BG_E_HTTP_ERROR_303 The response to the request is under a different Uniform Resource Identifier (URI) and must be retrieved using a GET method on that resource. 0x80190130 -2145844944 BG_E_HTTP_ERROR_304 The server’s response was not valid. The server was not following the defined protocol. Resume the job, and then Background Intelligent Transfer Service (BITS) will try again. 0x80190131 -2145844943 BG_E_HTTP_ERROR_305 The requested resource must be accessed through the proxy given by the location field. 0x80190133 -2145844941 BG_E_HTTP_ERROR_307 The URL has been temporarily relocated. Try again later. 0x80190190 -2145844848 BG_E_HTTP_ERROR_400 The server cannot process the request because the syntax is not valid. 0x80190191 -2145844847 BG_E_HTTP_ERROR_401 The requested resource requires user authentication. 0x80190192 -2145844846 BG_E_HTTP_ERROR_402 The server’s response was not valid. The server was not following the defined protocol. Resume the job, and then Background Intelligent Transfer Service (BITS) will try again. 0x80190193 -2145844845 BG_E_HTTP_ERROR_403 The client does not have sufficient access rights to the requested server object. Cannot execute requested URL in the current application pool IIS returns this error in some transient error cases too such as 403.9 — Forbidden: Too many clients are trying to connect to the Web server.403.15 — Forbidden: Client access licenses have exceeded limits on the Web server. 0x80190194 -2145844844 BG_E_HTTP_ERROR_404 The requested URL does not exist on the server. 0x80190195 -2145844843 BG_E_HTTP_ERROR_405 The method used is not allowed. 0x80190196 -2145844842 BG_E_HTTP_ERROR_406 No responses acceptable to the client were found. 0x80190197 -2145844841 BG_E_HTTP_ERROR_407 Proxy authentication is required. 0x80190198 -2145844840 BG_E_HTTP_ERROR_408 The server timed out waiting for the request. 0x80190199 -2145844839 BG_E_HTTP_ERROR_409 The request could not be completed because of a conflict with the current state of the resource. The user should resubmit the request with more information. 0x8019019A -2145844838 BG_E_HTTP_ERROR_410 The requested resource is not currently available at the server, and no forwarding address is known. 0x8019019B -2145844837 BG_E_HTTP_ERROR_411 The server cannot accept the request without a defined content length. 0x8019019C -2145844836 BG_E_HTTP_ERROR_412 The precondition given in one or more of the request header fields evaluated to false when it was tested on the server. 0x8019019D -2145844835 BG_E_HTTP_ERROR_413 The server cannot process the request because the request entity is too large. 0x8019019E -2145844834 BG_E_HTTP_ERROR_414 The server cannot process the request because the request Uniform Resource Identifier (URI) is longer than the server can interpret. 0x8019019F -2145844833 BG_E_HTTP_ERROR_415 The server’s response was not valid. The server was not following the defined protocol. Resume the job, and then Background Intelligent Transfer Service (BITS) will try again. 0x801901A1 -2145844831 BG_E_HTTP_ERROR_417 The server could not meet the expectation given in an Expect request-header field. 0x801901C1 -2145844799 BG_E_HTTP_ERROR_449 The server’s response was not valid. The server was not following the defined protocol. Resume the job, and then Background Intelligent Transfer Service (BITS) will try again. 0x801901F4 -2145844748 BG_E_HTTP_ERROR_500 The server encountered an unexpected condition that prevented it from fulfilling the request. 0x801901F5 -2145844747 BG_E_HTTP_ERROR_501 The server does not support the functionality required to fulfill the request. 0x801901F6 -2145844746 BG_E_HTTP_ERROR_502 The server, while acting as a gateway or proxy to fulfill the request, received an invalid response from the upstream server it accessed. 0x801901F7 -2145844745 BG_E_HTTP_ERROR_503 The service is temporarily overloaded. 0x801901F8 -2145844744 BG_E_HTTP_ERROR_504 The request was timed out waiting for a gateway. Can typically be a DNS issue 0x801901F9 -2145844743 BG_E_HTTP_ERROR_505 The server does not support the HTTP protocol version that was used in the request message. 0x801901FA -2145844742 NULL 0x80194000 -2145828864 BITS_MC_JOB_CANCELLED The administrator canceled job on behalf of %3. The job ID was %1. 0x80194001 -2145828863 BITS_MC_FILE_DELETION_FAILED While canceling job, BITS was not able to remove the temporary files. 0x80194002 -2145828862 BITS_MC_FILE_DELETION_FAILED_MORE Due to space limitations, not all files are listed here. Check for additional files of the form BITxxx.TMP in the same directory. 0x80194003 -2145828861 BITS_MC_JOB_PROPERTY_CHANGE The administrator modified the property of job. The job ID was %1. 0x80194004 -2145828860 BITS_MC_JOB_TAKE_OWNERSHIP The administrator took ownership of job. The job ID was %1. 0x80194005 -2145828859 BITS_MC_JOB_SCAVENGED Job was canceled after being inactive for more than xx days. The job ID was %1. 0x80194006 -2145828858 BITS_MC_JOB_NOTIFICATION_FAILURE Job failed to notify its associated application. BITS will retry in xx minutes. The job ID was %1. 0x80194007 -2145828857 BITS_MC_STATE_FILE_CORRUPT The BITS job list is not in a recognized format. It may have been created by a different version of BITS. The job list has been cleared. 0x80194008 -2145828856 BITS_MC_FAILED_TO_START The BITS server failed to start. Try restarting the service at a later time. 0x80200001 -2145386495 BG_E_Not_Found The requested job was not found. 0x80200002 -2145386494 BG_E_INVALID_STATE The requested action is not allowed in the current job state. The job might have been canceled or completed transferring. It is in a read-only state now. 0x80200003 -2145386493 BG_E_EMPTY There are no files attached to this job. Attach files to the job, and then try again. 0x80200004 -2145386492 BG_E_FILE_NOT_AVAILABLE No file is available because no URL generated an error. 0x80200005 -2145386491 BG_E_PROTOCOL_NOT_AVAILABLE No protocol is available because no URL generated an error. 0x80200006 -2145386490 BG_S_ERROR_CONTEXT_NONE No errors have occurred. 0x80200007 -2145386489 BG_E_ERROR_CONTEXT_UNKNOWN The error occurred in an unknown location. 0x80200008 -2145386488 BG_E_ERROR_CONTEXT_GENERAL_QUEUE_MANAGER The error occurred in the Background Intelligent Transfer Service (BITS) queue manager. 0x80200009 -2145386487 BG_E_ERROR_CONTEXT_LOCAL_FILE The error occurred while the local file was being processed. Verify that the file is not in use, and then try again. 0x8020000A -2145386486 BG_E_ERROR_CONTEXT_REMOTE_FILE The error occurred while the local file was being processed. Verify that the file is not in use, and then try again. 0x8020000B -2145386485 BG_E_ERROR_CONTEXT_GENERAL_TRANSPORT The error occurred in the transport layer. The client could not connect to the server. 0x8020000C -2145386484 BG_E_ERROR_CONTEXT_QUEUE_MANAGER_NOTIFICATION The error occurred while the notification callback was being processed. Background Intelligent Transfer Service (BITS) will try again later. 0x8020000D -2145386483 BG_E_Destination_Locked The destination file system volume is not available. Verify that another program, such as CheckDisk, is not running, which would lock the volume. When the volume is available, Background Intelligent Transfer Service (BITS) will try again. 0x8020000E -2145386482 BG_E_VOLUME_CHANGED The destination volume has changed. If the disk is removable, it might have been replaced with a different disk. Reinsert the original disk and resume the job. 0x8020000F -2145386481 BG_E_ERROR_INFORMATION_UNAVAILABLE No errors have occurred. 0x80200010 -2145386480 BG_E_NETWORK_DISCONNECTED There are currently no active network connections. Background Intelligent Transfer Service (BITS) will try again when an adapter is connected. 0x80200011 -2145386479 BG_E_MISSING_FILE_SIZE When BITS sends a HEAD request and server/proxy doesn’t return Content-Length header in the response, BITS puts the job in ERROR state with BG_E_MISSING_FILE_SIZE. BITS 1.5 puts the job in ERROR state with BG_E_INVALID_SERVER_RESPONSE error. Apache 2.0 proxy server is known to exhibit this behavior. 0x80200012 -2145386478 BG_E_INSUFFICIENT_HTTP_SUPPORT The server does not support HTTP 1.1. 0x80200013 -2145386477 BG_E_INSUFFICIENT_RANGE_SUPPORT BITS uses range header in HTTP requests to request parts of a file. If the server or proxy doesn’t understand Range requests and returns full file instead of the requested range, BITS puts the job in ERROR state. Apache 1.3 proxy is known to show this behavior if the requested file is already in the cache. 0x80200014 -2145386476 BG_E_REMOTE_NOT_SUPPORTED Background Intelligent Transfer Service (BITS) cannot be used remotely. 0x80200015 -2145386475 BG_E_NEW_OWNER_DIFF_MAPPING The drive mapping for the job is different for the current owner than for the previous owner. Use a UNC path instead. 0x80200016 -2145386474 BG_E_NEW_OWNER_NO_FILE_ACCESS The new owner has insufficient access to the local files for the job. The new owner might not have permissions to access the job files. Verify that the new owner has sufficient permissions, and then try again. 0x80200017 -2145386473 BG_S_PARTIAL_COMPLETE Some of the transferred files were deleted because they were incomplete 0x80200018 -2145386472 BG_E_PROXY_LIST_TOO_LARGE The HTTP proxy list cannot be longer than 32,000 characters. Try again with a shorter proxy list. 0x80200019 -2145386471 BG_E_PROXY_BYPASS_LIST_TOO_LARGE The HTTP proxy bypass list cannot be longer than 32,000 characters. Try again with a shorter bypass proxy list. 0x8020001A -2145386470 BG_S_UNABLE_TO_DELETE_FILES Some of the temporary files could not be deleted. Check the system event log for the complete list of files that could not be deleted. 0x8020001B -2145386469 BG_E_INVALID_SERVER_RESPONSE The server’s response was not valid. The server was not following the defined protocol. Resume the job, and then Background Intelligent Transfer Service (BITS) will try again. 0x8020001C -2145386468 BG_E_TOO_MANY_FILES No more files can be added to this job. 0x8020001D -2145386467 BG_E_LOCAL_FILE_CHANGED The local file was changed during the transfer. Recreate the job, and then try to transfer it again. 0x8020001E -2145386466 BG_E_ERROR_CONTEXT_REMOTE_APPLICATION The program on the remote server reported the error. 0x8020001F -2145386465 BG_E_SESSION_NOT_FOUND The specified session could not be found on the server. Background Intelligent Transfer Service (BITS) will try again. 0x80200020 -2145386464 BG_E_TOO_LARGE The job is too large for the server to accept. This job might exceed a job size limit set by the server administrator. Reduce the size of the job, and then try again. 0x80200021 -2145386463 BG_E_STRING_TOO_LONG The specified string is too long. 0x80200022 -2145386462 BG_E_CLIENT_SERVER_PROTOCOL_MISMATCH The client and server versions of Background Intelligent Transfer Service (BITS) are incompatible. 0x80200023 -2145386461 BG_E_SERVER_EXECUTE_ENABLE Scripting OR execute permissions are enabled on the IIS virtual directory associated with the job. To upload files to the virtual directory, disable the scripting and execute permissions on the virtual directory. 0x80200024 -2145386460 BG_E_No_Progress BITS The job is not making headway. The server may be misconfigured. Background Intelligent Transfer Service (BITS) will try again later. 0x80200025 -2145386459 BG_E_USERNAME_TOO_LARGE The user name cannot be longer than 300 characters. Try again with a shorter name. 0x80200026 -2145386458 BG_E_PASSWORD_TOO_LARGE The password cannot be longer than 300 characters. Try again with a shorter password. 0x80200027 -2145386457 BG_E_INVALID_AUTH_TARGET The authentication target specified in the credentials is not defined. 0x80200028 -2145386456 BG_E_INVALID_AUTH_SCHEME The authentication scheme specified in the credentials is not defined. 0x80200029 -2145386455 BG_E_FILE_NOT_FOUND The specified file name does not match any of the files in the job. 0x8020002A -2145386454 BG_S_PROXY_CHANGED The proxy server was changed. 0x8020002B -2145386453 BG_E_INVALID_RANGE The requested byte range extends beyond the end of the web page. Use byte ranges that are wholly within the page. 0x8020002C -2145386452 BG_E_OVERLAPPING_RANGES The list of byte ranges contains some overlapping ranges, which are not supported. 0x8020002D -2145386451 BG_E_CONNECT_FAILURE A connection could not be established. 0x8020002E -2145386450 BG_E_CONNECTION_CLOSED The connection was prematurely closed. 0x8020002F -2145386449 BG_E_KEEP_ALIVE_FAILURE The connection for a request that specifies the Keep-alive header was closed unexpectedly. 0x80200030 -2145386448 BG_E_MESSAGE_LENGTH_LIMIT_EXCEEDED A message was received that exceeded the specified limit when sending a request or receiving a response from the server. 0x80200031 -2145386447 BG_E_NAME_RESOLUTION_FAILURE The host name could not be found. 0x80200032 -2145386446 BG_E_PENDING An internal asynchronous request is pending. 0x80200033 -2145386445 BG_E_PIPELINE_FAILURE 0x80200034 -2145386444 BG_E_PROTOCOL_ERROR The response received from the server was complete but indicated a protocol-level error. 0x80200035 -2145386443 BG_E_PROXY_NAME_RESOLUTION_FAILURE The proxy name could not be found. 0x80200036 -2145386442 BG_E_RECEIVE_FAILURE A complete response was not received from the server. 0x80200037 -2145386441 BG_E_REQUEST_CANCELED The request was canceled. 0x80200038 -2145386440 BG_E_SECURE_CHANNEL_FAILURE An error occurred while establishing a connection using SSL. 0x80200039 -2145386439 BG_E_SEND_FAILURE complete request could not be sent to the remote server. 0x8020003A -2145386438 BG_E_SERVER_PROTOCOL_VIOLATION The server response was not valid. 0x8020003B -2145386437 BG_E_TIMEOUT The operation exceeded the time limit. 0x8020003C -2145386436 BG_E_TRUST_FAILURE A server certificate could not be validated. 0x8020003D -2145386435 BG_E_UNKNOWN_ERROR A unknown error occured. 0x8020003E -2145386434 BG_E_BLOCKED_BY_POLICY Group Policy settings prevent background jobs from running at this time. 0x8020003F -2145386433 BG_E_INVALID_PROXY_INFO The supplied proxy server or bypass list is invalid. 0x80200040 -2145386432 BG_E_INVALID_CREDENTIALS The format of the supplied security credentials is invalid. 0x80240001 -2145124351 SUS_E_NO_SERVICE for whatever reason, SUS agent can not provide the service 0x80240002 -2145124350 SUS_E_MAX_CAPACITY_REACHED maximum capacity of the service is reached 0x80240003 -2145124349 SUS_E_UNKNOWN_ID id not found 0x80240004 -2145124348 SUS_E_NOT_INITIALIZED object is not correctly initialized 0x80240005 -2145124347 SUS_E_RANGEOVERLAP Update handler attempted to request a byte range that overlapped a previously requested byte range 0x80240006 -2145124346 SUS_E_TOOMANYRANGES Update handler attempted to request too many ranges 0x80240007 -2145124345 SUS_S_ALREADY_UNINSTALLED — SUS_E_INVALIDINDEX The update to be uninstalled is already not installed — An attempt was made to use an invalid index 0x80240008 -2145124344 SUS_E_ITEMNOTFOUND A query was made for an item with a particular key and that key was not found 0x80240009 -2145124343 SUS_E_OPERATIONINPROGRESS The caller attempted to perform an operation on an interface while another operation was in progress. 0x8024000a -2145124342 SUS_E_COULDNOTCANCEL The caller attempted to cancel an operation that is not cancelable 0x8024000B -2145124341 SUS_E_CALL_CANCELLED call has been cancelled 0x8024000C -2145124340 SUS_E_NOOP no operation is needed 0x8024000D -2145124339 SUS_E_XML_MISSINGDATA the SUS agent is attempting to parse an update’s XML blob and has not found expected data 0x8024000E -2145124338 SUS_E_XML_INVALID the SUS agent is attempting to parse an update’s XML blob and has encountered data that is invalid 0x8024000F -2145124337 SUS_E_CYCLE_DETECTED cycle detected in meta data 0x80240010 -2145124336 SUS_E_TOO_DEEP_RELATION too deep relation ship found 0x80240011 -2145124335 SUS_E_REG_VALUE_INVALI registry value was read but is invalid 0x80240012 -2145124334 SUS_E_REG_VALUE_INVALID registry value was read but is invalid 0x80240013 -2145124333 SUS_E_EE_UNKNOWN_EXPRESSION an expression handler was passed an expression that it doesn’t know about 0x80240014 -2145124332 SUS_E_EE_INVALID_EXPRESSION an expression handler was passed an expression that is bad. 0x80240015 -2145124331 SUS_E_EE_MISSING_METADATA an expression handler was passed an expression that requires an applicability metadata blob, but did not receive one or received too many. 0x80240016 -2145124330 SUS_E_INSTALL_NOT_ALLOWE try to install while another install is going on or reboot is pending 0x80240017 -2145124329 SUS_E_NOT_APPLICABLE install is not needed because no updates are applicable 0x80240018 -2145124328 WU_E_NO_USERTOKEN operation failed due to missing user token 0x80240019 -2145124327 WU_E_EXCLUSIVE_INSTALL_CONFliCT try to install an exclusive update with other updates at the same time 0x8024001a -2145124326 WU_E_POLICY_NOT_SET policy value is not set 0x8024001b -2145124325 WU_E_SELFUPDATE_IN_PROGRESS self-update in progress 0x8024001C -2145124324 SUS_E_WRONGMSIVERSION 0x8024001D -2145124323 WU_E_INVALID_UPDATE an update had bogus metadata 0x8024001E -2145124322 WU_E_SERVICE_STOP call was aborted due to service stop or system shut down 0x8024001F -2145124321 SUS_E_NO_CONNECTION no network connection is available to finish the operation 0x80240020 -2145124320 SUS_E_NO_INTERACTIVE_USER interactive user is missing to finish the operation 0x80240021 -2145124319 WU_E_TIME_OUT operation timed out 0x80240022 -2145124318 WU_E_ALL_UPDATES_FAILED operation failed on all specified updates 0x80240023 -2145124317 WU_E_EULAS_DECLINED EULA’s for all the updates are declined 0x80240024 -2145124316 WU_E_NO_UPDATE there are no update 0x80240025 -2145124315 WU_E_USER_ACCESS_DISABLED User access to Windows Update is prevented by Group Policy setting 0x80240026 -2145124314 WU_E_INVALID_UPDATE_TYPE invalid type of update 0x80240027 -2145124313 WU_E_URL_TOO_LONG URL is too long 0x80240028 -2145124312 WU_E_UNINSTALL_NOT_ALLOWED uninstall is not allowed due to non managed environment 0x80240029 -2145124311 WU_E_INVALID_PRODUCT_LICENSE A product with an invalid license was found on the system. 0x8024002a -2145124310 WU_E_MISSING_HANDLER A component required for detecting applicable updates was missing. 0x8024002b -2145124309 WU_E_LEGACYSERVER The Sus server we are talking to is a Legacy Sus Server (Sus Server 1.0) 0x8024002c -2145124308 WU_E_BIN_SOURCE_ABSENT A binary-delta patch failed because the source was required 0x8024002d -2145124307 WU_E_FF_SOURCE_ABSENT a full-file patch failed because the source was required 0x8024002E -2145124306 SUS_E_WU_DISABLED non managed server access is disallowed 0x8024002f -2145124305 WU_E_CALL_CANCELLED_BY_POLICY call cancelled because of DisableWindowsUpdateAccess policy takes effect 0x80240030 -2145124304 WU_E_INVALID_PROXY_SERVER invalid format for proxy list 0x80240031 -2145124303 WU_E_INVALID_FILE file is not of the right format 0x80240032 -2145124302 WU_E_INVALID_CRITERIA invalid criteria string 0x80240033 -2145124301 WU_E_EULA_UNAVAILABLE EULA download failure 0x80240034 -2145124300 WU_E_DOWNLOAD_FAILED Failed to download 0x80240035 -2145124299 WU_E_UPDATE_NOT_PROCESSED INTERNAL ONLY: The update was not processed. 0x80240036 -2145124298 WU_E_INVALID_OPERATION The operation is invalid for the object’s current state. 0x80240037 -2145124297 WU_E_NOT_SUPPORTED The invoked functionality is not supported (80240037). 0x80240FFF -2145120257 WU_E_UNEXPECTED generic unexpected failure 0x80241001 -2145120255 WU_E_MSI_WRONG_VERSION The MSI version on the machine is less than what we expect (SUS 2.0 requires MSI 3.0) 0x80241002 -2145120254 WU_E_MSI_NOT_CONFIGURED MSI is not configured 0x80241003 -2145120253 WU_E_MSP_DISABLED MSI patching is disabled by policy 0x80241fff -2145116161 U_E_MSP_UNEXPECTED generic unexpected MSP failure 0x80242000 -2145116160 SUS_E_UH_REMOTEUNAVAILABLE The caller requested a remote object, but no remote process is available 0x80242001 -2145116159 WU_E_UH_LOCALONLY The caller requested a remote object, but the specified handler is local only 0x80242002 -2145116158 WU_E_UH_UNKNOWNHANDLER The caller requested an unknown handler object 0x80242003 -2145116157 WU_E_UH_REMOTEALREADYACTIVE The caller requested an unknown handler object 0x80242004 -2145116156 SUS_E_UH_DOESNOTSUPPORTACTION The update does not support the current action (install or uninstall) 0x80242005 -2145116155 SUS_E_UH_WRONGHANDLER The caller tried to use the wrong handler for an action 0x80242006 -2145116154 SUS_E_UH_INVALIDMETADATA The caller passed an update with invalid metadata to the handler 0x80242007 -2145116153 SUS_E_UH_INSTALLERHUNG The installer took too long and was terminated 0x80242008 -2145116152 SUS_E_UH_OPERATIONCANCELLED The install was canceled via a handler method (as opposed to, for example, an installer running with UI that was cancelled externally to SUS) 0x80242009 -2145116151 SUS_E_UH_BADHANDLERXML The XML contained in the handler specific data for the update is invalid. 0x8024200a -2145116150 WU_E_UH_CANREQUIREINPUT The update may require user input so can not be installed in this context. 0x8024200B -2145116149 SUS_E_UH_INSTALLERFAILURE At least one update passed to the handler failed to install. 0x8024200c -2145116148 WU_E_UH_FALLBACKTOSELFCONTAINED Handler should fall back to self-contained from delta. 0x8024200D -2145116147 SUS_E_UH_NEEDANOTHERDOWNLOAD The installer requires more data to be downloaded 0x8024200E -2145116146 WU_E_UH_NOTIFYFAILURE The attempted operation was not allowed 0x80242fff -2145112065 WU_E_UH_UNEXPECTED generic unexpected update handler failure 0x80243fff -2145107969 WU_E_AUCLIENT_UNEXPECTED generic unexpected UI [AU Client] failures 0x80244000 -2145107968 WU_E_PT_SOAPCLIENT_BASE Used as a base to map SOAPCLIENT_ERROR errors. 0x80244001 -2145107967 SUS_E_PT_SOAPCLIENT_INITIALIZE SOAPCLIENT_INITIALIZE_ERROR initialization failed — most likely an MSXML installation problem 0x80244002 -2145107966 WU_E_PT_SOAPCLIENT_OUTOFMEMORY SOAPCLIENT_OUTOFMEMORY out of memory 0x80244003 -2145107965 WU_E_PT_SOAPCLIENT_GENERATE SOAPCLIENT_GENERATE_ERROR failed in generating the response 0x80244004 -2145107964 SUS_E_PT_SOAPCLIENT_CONNECT failed connecting to server 0x80244005 -2145107963 WU_E_PT_SOAPCLIENT_SEND SOAPCLIENT_SEND_ERROR failed in sending message. This generic error has been deprecated in favor of the more specific underlying WinHTTP errors, which will be returned when the client encounters an error communicating with the server. 0x80244006 -2145107962 WU_E_PT_SOAPCLIENT_SERVER SOAPCLIENT_SERVER_ERROR server error 0x80244007 -2145107961 WU_E_PT_SOAPCLIENT_SOAPFAULT SOAPCLIENT_SOAPFAULT a SOAP Fault was returned by the server. See the more specific WU_E_PT_SOAP_xxxx mappings when a SOAP fault was returned by the server. 0x80244008 -2145107960 SUS_E_PT_SOAPCLIENT_PARSEFAULT SOAPCLIENT_PARSEFAULT_ERROR failed in parsing SOAP fault 0x80244009 -2145107959 WU_E_PT_SOAPCLIENT_READ SOAPCLIENT_READ_ERROR failed in reading response 0x8024400A -2145107958 SUS_E_PT_SOAPCLIENT_PARSE failed in parsing response 0x8024400b -2145107957 WU_E_PT_SOAP_VERSION SOAP_E_VERSION_MISMATCH Invalid namespace for the SOAP envelope 0x8024400c -2145107956 WU_E_PT_SOAP_MUST_UNDERSTAND SOAP_E_MUST_UNDERSTAND Child of header with mustUnderstand attribute = 1 wasn’t understood or obeyed 0x8024400D -2145107955 SUS_E_PT_SOAP_CLIENT SOAP_E_CLIENT The message was malformed or incomplete. No reason to retry unless problem fixed. 0x8024400E -2145107954 SUS_E_PT_SOAP_SERVER The message was OK but server couldn’t process at the moment. Same message *may* succeed at a later time. 0x8024400f -2145107953 WU_E_PT_WMI_ERROR An unspecified error occurred using WMI 0x80244010 -2145107952 SUS_E_PT_EXCEEDED_MAX_SERVER_TRIPS The maximum allowed number of round trips to the server was exceeded 0x80244011 -2145107951 SUS_E_PT_SUS_SERVER_NOT_SET WUServer policy value is missing in the registry 0x80244012 -2145107950 WU_E_PT_DOUBLE_INITIALIZATION object is initialized second time 0x80244013 -2145107949 WU_E_PT_INVALID_COMPUTER_NAME Cannot determine computer name 0x80244014 -2145107948 WU_E_PT_INVALID_COMPUTER_LSID Cannot determine computer LSID 0x80244015 -2145107947 SUS_E_PT_REFRESH_CACHE_REQUIRED Server replied with InvalidCookie or ServerChanged Caller should refresh its internal state then repeat the call to Protocol Talker 0x80244016 -2145107946 SUS_E_PT_HTTP_STATUS_BAD_REQUEST Http status 400 — invalid syntax 0x80244017 -2145107945 SUS_E_PT_HTTP_STATUS_DENIED Http status 401 — access denied 0x80244018 -2145107944 SUS_E_PT_HTTP_STATUS_FORBIDDEN Http status 403 — request forbidden 0x80244019 -2145107943 SUS_E_PT_HTTP_STATUS_NOT_FOUND Http status 404 — object not found (0x80244019) 0x8024401A -2145107942 SUS_E_PT_HTTP_STATUS_BAD_METHOD Http status 405 — method is not allowed 0x8024401B -2145107941 SUS_E_PT_HTTP_STATUS_PROXY_AUTH_REQ Http status 407 — proxy authentication required 0x8024401c -2145107940 WU_E_PT_HTTP_STATUS_REQUEST_TIMEOUT Http status 408 — server timed out waiting for request (0x8024401c) 0x8024401d -2145107939 WU_E_PT_HTTP_STATUS_CONFLICT Http status 409 — user should resubmit with more info 0x8024401e -2145107938 WU_E_PT_HTTP_STATUS_GONE Http status 410 — the resource is no longer available 0x8024401f -2145107937 WU_E_PT_HTTP_STATUS_SERVER_ERROR Http status 500 — internal server error 0x80244020 -2145107936 WU_E_PT_HTTP_STATUS_NOT_SUPPORTED Http status 501 — required not supported 0x80244021 -2145107935 SUS_E_PT_HTTP_STATUS_BAD_GATEWAY Http status 502 — error response received from gateway 0x80244022 -2145107934 SUS_E_PT_HTTP_STATUS_SERVICE_UNAVAIL Http status 503 — temporarily overloaded (0x80244022) 0x80244023 -2145107933 SUS_E_PT_HTTP_STATUS_GATEWAY_TIMEOUT Http status 504 — timed out waiting for gateway 0x80244024 -2145107932 WU_E_PT_HTTP_STATUS_VERSION_NOT_SUP Http status 505 — HTTP version not supported 0x80244025 -2145107931 SUS_E_PT_FILE_LOCATIONS_CHANGED Server replied with FileLocationsChange Caller should refresh its internal state then repeat the call to Protocol Talker 0x80244026 -2145107930 SUS_E_PT_REGISTRATION_NOT_SUPPORTED Client doesn’t support registration with non-SUS server 0x80244027 -2145107929 WU_E_PT_NO_AUTH_PLUGINS_REQUESTED Server returned an empty AuthInfo list 0x80244028 -2145107928 SUS_E_PT_NO_AUTH_COOKIES_CREATED The client was unable to create any valid auth cookies 0x80244029 -2145107927 WU_E_PT_INVALID_CONFIG_PROP One of the Config ConfigurationProperty values was wrong 0x8024402a -2145107926 WU_E_PT_CONFIG_PROP_MISSING One of the Config ConfigurationProperty values was wrong 0x8024402b -2145107925 WU_E_PT_HTTP_STATUS_NOT_MAPPED Http status other than 200, but not mapped above 0x8024402c -2145107924 WU_E_PT_WINHTTP_NAME_NOT_RESOLVED Winhttp SendRequest/ReceiveResponse failed with 0x2ee7 error. Either the proxy server or target server name can not be resolved. Corresponding to ERROR_WINHTTP_NAME_NOT_RESOLVED. Stop/Restart service or reboot the machine if you see this error frequently. 0x80244fff -2145103873 WU_E_PT_UNEXPECTED generic unexpected protocol talker failure 0x80245001 -2145103871 WU_E_REDIRECTOR_LOAD_XML The XML extracted from the wuredir.cab failed to load into the DOM 0x80245002 -2145103870 WU_E_REDIRECTOR_S_FALSE An expected XML element node, map, attribute, value, etc. could not be found. 0x80245003 -2145103869 WU_E_REDIRECTOR_ID_SMALLER The redirectorId in the downloaded wuredir.cab is smaller than the cached cab. 0x8024502d -2145103827 WU_E_PT_SAME_REDIR_ID During recovery Protocol Talker failed to download a wuredir.cab with a newer redirectorId from the server 0x8024502e -2145103826 WU_E_PT_NO_MANAGED_RECOVER A redirector recovery action was specified, but the server is managed. 0x80245fff -2145099777 WU_E_REDIRECTOR_UNEXPECTED generic unexpected redirector failure 0x80246001 -2145099775 SUS_E_DM_URLNOTAVAILABLE The requested file does not have an URL 0x80246002 -2145099774 SUS_E_DM_INCORRECTFILEHASH The file digest did not match the expected value 0x80246003 -2145099773 WU_E_DM_UNKNOWNALGORITHM The file metadata requested an unknown hash algorithm 0x80246004 -2145099772 WU_E_DM_NEEDDOWNLOADREQUEST A download request from a download handler is required. 0x80246005 -2145099771 SUS_E_DM_NONETWORK Network connection was not available 0x80246006 -2145099770 SUS_E_DM_WRONGBITSVERSION The version of BITS installed on the machine is not compatible. 0x80246007 -2145099769 SUS_E_DM_NOTDOWNLOADED The update has not been downloaded. 0x80246008 -2145099768 SUS_E_DM_FAILTOCONNECTTOBITS Failed to create the IBackgroundCopyManager interface to BITS. The BITS service may have been disabled 0x80246009 -2145099767 WU_E_DM_BITSTRANSFERERROR A BITS transfer error occurred, but the exact error could not be retrieved. 0x80246fff -2145095681 WU_E_DM_UNEXPECTED generic unexpected download manager failure 0x80248000 -2145091584 WU_E_DS_SHUTDOWN The call failed because the SUS agent is shutting down 0x80248001 -2145091583 WU_E_DS_INUSE The call failed because the data store is in use and the operation can only be executed on an idle data store. 0x80248002 -2145091582 WU_E_DS_INVALID The data store is in an invalid state. This can occur if we attempt to validate the database schema and find a mismatch between the current state and the state we expect. 0x80248003 -2145091581 WU_E_DS_TABLEMISSING The data store has a missing table 0x80248004 -2145091580 WU_E_DS_TABLEINCORRECT The data store has a table whose columns are not what SUS expects 0x80248005 -2145091579 WU_E_DS_INVALIDTABLENAME The caller tried to open a table that is not in the datastore 0x80248006 -2145091578 WU_E_DS_BADVERSION The data store’s version does not match what the client expects 0x80248007 -2145091577 SUS_E_DS_NODATA The caller asked for data that is not in the data store 0x80248008 -2145091576 WU_E_DS_MISSINGDATA The data store is in an invalid state because data that should be present is missing. This error can occur if we encounter a column in a table that is NULL when it is not allowed to be NULL. 0x80248009 -2145091575 WU_E_DS_MISSINGREF The data store is in an invalid state because data that should be present is missing. This will occur if we try to fetch a linked row from another table and the linked row does not exist. This can happen with EULAs, files, and/or localized properties referenced by an update. 0x8024800a -2145091574 WU_E_DS_UNKNOWNHANDLER The caller attempted to add an update that used an unknown update handler 0x8024800b -2145091573 WU_E_DS_CANTDELETE The caller attempted to delete an update that is referenced by one or more services 0x8024800C -2145091572 SUS_E_DS_LOCKTIMEOUTEXPIRED The caller attempted to delete an update that is referenced by one or more services 0x8024800d -2145091571 WU_E_DS_NOCATEGORIES The caller attempted to add a non-toplevel category update that contained no parent categories 0x8024800e -2145091570 WU_E_DS_ROWEXISTS The caller attempted to add a row whose primary key matched an existing row 0x8024800f -2145091569 WU_E_DS_STOREFILELOCKED We attempted to initialize the datastore, but it was locked by another process 0x80248010 -2145091568 WU_E_DS_CANNOTREGISTER The caller is attepting to register the datastore with COM, but the store cannot be loaded into the current process 0x80248011 -2145091567 SUS_E_DS_UNABLETOSTART Could not create an out of proc datastore object 0x80248012 -2145091566 SUS_E_DS_MISSINGFILEFORURL a file URL was passed in for a file that does not exist in the datastore 0x80248013 -2145091565 SUS_E_DS_DUPLICATEUPDATEID the server has passed the same update to the client with two different revision ids 0x80248014 -2145091564 WU_E_DS_UNKNOWNSERVICE the caller has requested some action on a service that is not known to the datastore 0x80248015 -2145091563 SUS_E_DS_SERVICEEXPIRED the caller has requested a service whose registration has expired 0x80248016 -2145091562 WU_E_DS_DECLINENOTALLOWED an update cannot be declined while it is deployed with a deadline by 1 or more services or if it is a mandatory update 0x80248017 -2145091561 WU_E_DS_TABLESESSIONMISMATCH the caller attempted to close a table with a session it was not associated with 0x80248018 -2145091560 WU_E_DS_SESSIONLOCKMISMATCH the caller attempted to close a table with a session it was not associated with 0x80248019 -2145091559 WU_E_DS_NEEDWINDOWSSERVICE the caller attempted to remove the windows update service without having another service configured that delivers updates to windows 0x8024801a -2145091558 WU_E_DS_INVALIDOPERATION The attempted operation was not allowed 0x8024801b -2145091557 WU_E_DS_SCHEMAMISMATCH The schema of a table in a backup XML file cannot be reconciled with the current store schema 0x8024801c -2145091556 WU_E_DS_RESETREQUIRED The datastore required a reset and either the state of the current session was too complex to retry (it is in a caller initiated transaction or a caller acquired a section lock) or the reset failed. In either case, the only option is to release the session and try again with a newly acquired session. Once a session returns this error, it will always return this error. 0x8024801d -2145091555 WU_E_DS_IMPERSONATED The datastore cannot be called while impersonating 0x80248fff -2145087489 WU_E_DS_UNEXPECTED generic unexpected data store failure 0x8024A000 -2145083392 WU_E_AU_NOSERVICE AU was unable to service incoming AU calls 0x8024A001 -2145083391 SUS_E_AU_LEGACYSERVER 0x8024A002 -2145083390 WU_E_AU_NONLEGACYSERVER The legacy AU client stopped because the sus server has been upgraded 0x8024A003 -2145083389 WU_E_AU_LEGACYCLIENTDISABLED The legacy AU client stopped because it was disabled 0x8024A004 -2145083388 WU_E_AU_PAUSED AU was unable to service incoming AU calls because it was paused 0x8024Afff -2145079297 WU_E_AU_UNEXPECTED generic unexpected Automatic Updates 0x8024c001 -2145075199 WU_E_DRV_PRUNED Driver was pruned. 0x8024c002 -2145075198 WU_E_DRV_NOPROP_OR_LEGACY A property wasn’t found. Depending on the context this may not be an error. For example, it is expected that legacy drivers will be missing properties we require (there is no support for legacy drivers). 0x8024c003 -2145075197 WU_E_DRV_REG_MISMATCH The registry type we read didn’t match what was expected 0x8024c004 -2145075196 WU_E_DRV_NO_METADATA The driver Update didn’t have a metadata blob 0x8024c005 -2145075195 WU_E_DRV_MISSING_ATTRIBUTE The driver Update metadata was missing a required attribute 0x8024c006 -2145075194 WU_E_DRV_SYNC_FAILED A driver sync operation failed 0x8024c007 -2145075193 WU_E_DRV_NO_PRINTER_CONTENT No printer driver content following SyncApplicablePrinters 0x8024cfff -2145071105 WU_E_DRV_UNEXPECTED generic unexpected driver utility failure 0x8024d001 -2145071103 WU_E_SETUP_INVALID_INFDATA Setup failed due to invalid data in the INF file. 0x8024d002 -2145071102 WU_E_SETUP_INVALID_IDENTDATA Setup failed due to invalid data in the wuident file. 0x8024d003 -2145071101 WU_E_SETUP_ALREADY_INITIALIZED Setup failed due to multiple initialization. 0x8024d004 -2145071100 WU_E_SETUP_NOT_INITIALIZED Setup has not been initialized correctly. 0x8024d005 -2145071099 WU_E_SETUP_SOURCE_VERSION_MISMATCH Setup failed as the version specified in the INF file doesn’t match the source binary version. 0x8024d006 -2145071098 WU_E_SETUP_TARGET_VERSION_GREATER Setup failed as the target version on the system is higher than source binary version. 0x8024dfff -2145067009 WU_E_SETUP_UNEXPECTED Generic unexpected Setup failure. 0x8024e001 -2145067007 WU_E_EE_UNKNOWN_EXPRESSION an expression handler was passed an expression that it doesn’t know about 0x8024e002 -2145067006 WU_E_EE_INVALID_EXPRESSION an expression handler was passed an expression that is bad. 0x8024e003 -2145067005 WU_E_EE_MISSING_METADATA an expression handler was passed an expression that requires an applicability metadata blob, but did not receive one or received too many. 0x8024e004 -2145067004 WU_E_EE_INVALID_VERSION Invalid version of the serialized expression data. 0x8024e005 -2145067003 WU_E_EE_NOT_INITIALIZED The Expression Evaluator has not been initialized correctly. 0x8024e006 -2145067002 WU_E_EE_INVALID_ATTRIBUTEDATA An invalid attribute data was passed to an expression evaluator. 0x8024efff -2145062913 WU_E_EE_UNEXPECTED generic unexpected expression evaluator failures 0x8024f001 -2145062911 WU_E_REPORTER_EVENTCACHECORRUPT event cache file was corrupt/malformed 0x8024f002 -2145062910 WU_E_REPORTER_EVENTNAMESPACEPARSEFAILED event namespace descriptor XML could not be parsed 0x8024f003 -2145062909 WU_E_INVALID_EVENT event was reported with invalid/malformed data 0x8024f004 -2145062908 WU_E_SERVER_BUSY event was rejected by server because server was too busy 0x8024ffff -2145058817 WU_E_REPORTER_UNEXPECTED generic unexpected reporter failures 0x87FF0001 -2013331455 Error_Label_Unreadable 0x87FF0004 -2013331452 Error_Too_Many_Open_Files The system can not open the file 0x8DDD0001 -1914896383 ErrorNoScripting 0x8DDD0002 -1914896382 ErrorNotAdmin 0x8DDD0003 -1914896381 ErrorDisabled Site timeout waiting for the control. 0x8DDD0004 -1914896380 ErrorControlFailed 0x8DDD0006 -1914896378 ErrorWin2KLessThanSP3 0x8DDD0007 -1914896377 ErrorRebootRequired 0x8DDD000F -1914896369 ErrorIis404 0x8DDD0010 -1914896368 ErrorIis500 0x8DDD0012 -1914896366 ErrorNoFrames 0x8DDD0018 -1914896360 ErrorAUDisabled AU could be disabled, not started etc. BITS could be disabled or not started etc. 0xC0000005 -1073741819 STATUS_ACCESS_VIOLATION 0xC0000006 -1073741818 STATUS_IN_PAGE_ERROR 0xc000001d -1073741795 STATUS_ILLEGAL_INSTRUCTION 0xc000001e -1073741794 STATUS_INVALID_LOCK_SEQUENCE 0xc0000090 -1073741680 STATUS_FLOAT_INVALID OPERATION 0xc0000096 -1073741674 STATUS_PRIVILEGED_INSTRUCTION 0xc00000fd -1073741571 STATUS_STACK_OVERFLOW 0xc000013a -1073741510 STATUS_CONTROL_C_EXIT 0xC0000142 -1073741502 STATUS_DLL_INIT_FAILED 0xC0000194 -1073741420 Status_Not_Found object not found 0xC0000354 -1073740972 Status_Debugger_Inactive An attempt to do an operation on a debug port failed because the port is in the process of being deleted. 0xC8000147 -939523769 NULL 0xC8000152 -939523758 MCIERR_Seq_Port_Nonexistent 0xC8000158 -939523752 NULL 0xC80001FE -939523586 hrLogWriteFail unable to write to the log file 0xC8000211 -939523567 hrLogDiskFull 0xC8000240 -939523520 SE_Auditid_Assign_Special_Priv 0xC80003F3 -939523085 hrOutOfMemory The computer is out of memory 0xC80003F6 -939523082 hrOutOfBuffers out of database page buffers 0xC80003FA -939523078 hrReadVerifyFailure 0xC80003FB -939523077 Error_No_Log_Space System could not allocate the required space in a registry log 0xC80003FE -939523074 hrDiskIO 0xC8000442 -939523006 CS_Event_reg_Operations_Failed 0xC800044E -939522994 hrWriteConflict The write lock failed due to an outstanding write lock 0xC8000710 -939522288 hrDiskFull 0xD0000005 -805306363 ERROR_ACCESS_DENIED 0xD0000006 -805306362 Error_Invalid_Handle 0xD0000008 -805306360 ERROR_NOT_ENOUGH_MEMORY not enough storage is available to process this command 0xD0000017 -805306345 Error_CRC 0xD0000018 -805306344 Error_Bad_Length the program issued a command but the command length is incorrect 0xD000001D -805306339 Error_Write_Fault the system cannot write the specified device 0xD0000022 -805306334 Error_Wrong_Disk 0xD000012D -805306067 HTTP_Status_Moved Object Permanently moved 0xD0000135 -805306059 MCIErr_Set_Drive 0xD000013A -805306054 NULL 0xD0000142 -805306046 MCIERR_Wave_Inputsinuse 0xD0000194 -805305964 HTTP_Status_Not_Found 0xD0000354 -805305516 NULL 0xe0000101 -536870655 ERROR_SECTION_NOT_FOUND 0xe0000201 -536870399 ERROR_CLASS_MISMATCH 0xe0000203 -536870397 ERROR_NO_DRIVER_SELECTED 0xe000020b -536870389 ERROR_NO_SUCH_DEVINST 0xe000020d -536870387 ERROR_INVALID_CLASS_INSTALLER 0xe0000217 -536870377 ERROR_BAD_SERVICE_INSTALLSECT 0xe0000219 -536870375 ERROR_NO_ASSOCIATED_SERVICE 0xe000022b -536870357 ERROR_DI_DONT_INSTALL 0xe000022d -536870355 ERROR_NON_WINDOWS_NT_DRIVER 0xe000022f -536870353 ERROR_NO_CATALOG_FOR_OEM_INF 0xe0000230 -536870352 ERROR_DEVINSTALL_QUEUE_NONNATIVE 0xe0000234 -536870348 ERROR_DRIVER_NONNATIVE 0xe000023a -536870342 ERROR_PNP REGISTRY_ERROR 0xFFFFF8F0 -1808 JET_errDiskFull 0xFFFFFb40 -1216 JET_errAttachedDatabaseMismatch 0xFFFFFb4a -1206 JET_errDatabaseCorrupted 0xFFFFFBBE -1090 JET_errInstanceUnavailable 0xFFFFFBF8 -1032 JET_errFileAccessDenied 0xFFFFFC01 -1023 NULL 0xFFFFFC02 -1022 JET_errDiskIO 0xFFFFFC06 -1018 JET_errReadVerifyFailure 0xFFFFFC0D -1011 JET_errOutOfMemory 0xFFFFFdc9 -567 JET_errDbTimeTooNew 0xFFFFFdda -550 JET_errDatabaseInconsistent 0xFFFFFDEC -532 NULL 0xFFFFFDfd -515 JET_errInvalidLogSequence 0xfffffe02 -510 JET_errLogWriteFail 0xfffffe0b -501 JET_errLogFileCorrupt 0xffffff99 -103 JET_errOutOfThreads 0xFFFFFFFF -1 Cancel 800A01AD -2146827859 ActiveX component can»t create object

Error Microsoft Life Cam «a later version of the Webcam Live software is already installed, to reinstall the life CAM software, you must first uninstall the CAM of your computer software.»

Dear Mircosoft
I just bought the Microsoft Live Cam VX-2000.  You are able to help.
I followed the installation, then at the end when the picture came on the screen an error message came on the screen: «a later version of the Webcam Live software is already installed, to reinstall the Webcam Live software, you must first uninstall the software of Webcam Live from your computer.»
I’m not very user-friendly computer.
I get a green flashing on the camera.
I can’t use it in Skype.
Thank you
JO Smith

Hi josmith416342,

·         You have installed all software associated with the device?

·         Do you have any device life Cam earlier?

Check to see if the following is useful.

Method 1: Check list of programs for the device relating to the software. Uninstall the same and try to reinstall the software.

How to change or remove a program in Windows XP

Method 2: You can follow the steps in the following article and see if it helps. The error mentioned in the article is different, but this can be tried.

Troubleshoot installation of Intellipoint and IntelliType LifeCam software

window update error 800F081F

Solution how to fix the window update error 800F081F

Did you by chance read this: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/1467f44b-ee27-4f7d-98d7-f1c4b35b3395

0x800F081F

CBS_E_SOURCE_MISSING

Run the SURT — Description of the update of the system for Windows Vista tool
http://support.Microsoft.com/kb/947821

I assumed that you are using «Vista».

TaurArian [MVP] 2005-2010 — Update Services

Cannot install Windows Update (error: 0x8024D007)

OK, I go here:

http://www.update.Microsoft.com/microsoftupdate/v6/default.aspx?ln=en-us

and get this:

«Update Windows to work with this Web site
To continue, you must first download and install the latest version of some windows updating software that is designed to work with the site. »

with a button below that says «Windows Update». I click the button.

Then he said: «download and install the latest updated software» and it counts up to 100% says «Download», then increased to 100% & says «register». Then, I get this:

[Error number: 0x8024D007]
The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.
For self-help options:

I tried the fixes on these pages and neither worked:

http://support.Microsoft.com/kb/949104/

http://support.Microsoft.com/kb/956701

Help, please!

The computer belongs to my employer.

Please contact your IT department or your system administrator.

Microsoft offers support without charge for problems of this kind, but only for users.

~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

Windows update error 0 x 80248011 windows xp — have tried most of the solutions here

Try to get updates for my HP running Windows XP Media Center addition version 2002 with Service Pack 3

I recently put Norton Antivirus on my computer, none of the others are having this problem, but it’s the single XP computer we have.

Get this error when I try to use windows update: 0 x 80248011

I ran FixIt tool and he says that he finds the problems and fixed them. It wasn’t true, it always gives me the same exact error and can not get updates of window on my computer. That’s what he said when I select the option to tell him what to the difficulty:

Details of the update of Windows editor

Problems found
Components Windows Update must be repairedWindows of update components needs to be repaired
One or more components of Windows Update are configured incorrectly detected
Fix the Windows Update components not running

 Verified issues
By default Windows Update data locations have Windows Update changedDefault data locations have changed
The location where the Windows Update stores data has changed and must be repaired Checked

Problems found details

Update Windows 6 components must be repaired detected

 One or more components of Windows Update are configured incorrectly
Fix the Windows Update components not running

 Repairing the Windows Update components frequently solves common Windows Update errors

Issues checked the details of the detection

6 Windows Update default data locations have changed Checked

 The location where Windows Update stores data has changed and needs to be repaired
Fix the Windows Update default locations will not run

 Moved from Windows Update to the default settings of Windows

Details of detection

Collection information
Computer name: ZACHCPU_XP
Windows Version: 5.1
Architecture: x 86
Time: 01/05/2013-16:04:18

Publisher details

Windows Update
Problems that prevent you from Windows Update.
Package Version: 4.0.2.20110411
Publisher: Microsoft Corporation

Try to get updates for my HP running Windows XP Media Center addition version 2002 with Service Pack 3

I recently put Norton Antivirus on my computer, none of the others are having this problem, but it’s the single XP computer we have.

Get this error when I try to use windows update: 0 x 80248011

I ran FixIt tool and he says that he finds the problems and fixed them. It wasn’t true, it always gives me the same exact error and can not get updates of window on my computer. That’s what he said when I select the option to tell him what to the difficulty:

Details of the update of Windows editor

Problems found
Components Windows Update must be repairedWindows of update components needs to be repaired
One or more components of Windows Update are configured incorrectly detected
Fix the Windows Update components not running

 Verified issues
By default Windows Update data locations have Windows Update changedDefault data locations have changed
The location where the Windows Update stores data has changed and must be repaired Checked

Problems found details

Update Windows 6 components must be repaired detected

 One or more components of Windows Update are configured incorrectly
Fix the Windows Update components not running

 Repairing the Windows Update components frequently solves common Windows Update errors

Issues checked the details of the detection

6 Windows Update default data locations have changed Checked

 The location where Windows Update stores data has changed and needs to be repaired
Fix the Windows Update default locations will not run

 Moved from Windows Update to the default settings of Windows

Details of detection

Collection information
Computer name: ZACHCPU_XP
Windows Version: 5.1
Architecture: x 86
Time: 01/05/2013-16:04:18

Publisher details

Windows Update
Problems that prevent you from Windows Update.
Package Version: 4.0.2.20110411
Publisher: Microsoft Corporation

clear the cache of Internet Explorer. To do this, follow these steps:

1. In the Internet Explorer Tools menu, click Internet Options.
2. On the general tab, click delete files in the Temporary Internet files section.
3. Click OK, and then click OK again.

To resolve this error, recreate the database that stores Windows Update or Microsoft Update information on your computer. To do this, follow these steps:

1. Click Start, click run type cmd in the Open box, and then click OK.
2. At the command prompt, type the following command and press ENTER: net stop wuauserv
3. At the command prompt, type the following command and press ENTER: cd /d c:Windows SoftwareDistribution

   Where c:Windows is the folder where Windows is installed.

4. At the command prompt, type the following command with the quotation marks and press ENTER: rd /S /Q DataStore
5. At the command prompt, type the following command and press ENTER: net start wuauserv.
6. Close the command prompt window.

Windows update error from 8 to 8.1 — Code 8007041

Related to: common Windows 8 for the 8.1 upgrade problems.

There was updates problem

Error (s) found:

Code D 8007041

Original title: 8 to 8.1 windows update error

Hello

You can get this error if some third-party anti-virus collide with Windows Update. To resolve this problem, use the following methods in the order in which they are listed. After each method, check to see if the problem is resolved. If the problem is not resolved, try the next method.

Method 1: if you are using a third-party antivirus program. I suggest you temporarily disable and check.

Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

Method 2:  I suggest you to run the Windows Update troubleshooting from this link or manually follow the instructions in this link to try to solve the problem of Windows update first.

http://support.Microsoft.com/kb/971058/en-us

If the troubleshooter as well as the measures do not help, try to run the DISM commands and then try to check if you are able to install the update to Windows. (Install only 3-5 updates at a time instead of installing all the updates total)

1. type command prompt in the charms of the search, right-click on it and select run as administrator.

2 type the following commands. Press ENTER after each command.

DISM.exe / Online/Cleanup-image /Scanhealth

DISM.exe / Online/Cleanup-image /Restorehealth

3. close the command prompt, and then run Windows Update again.

Once the Windows updates are installed correctly, restart the computer and check if Windows 8.1 update is available.  Make sure the update KB 2871389 is correctly installed on the computer. Please refer to the http://support.microsoft.com/kb/2871389/en-us

If the update is not always displayed in the store, you can have a look at the information provided in the http://windows.microsoft.com/en-in/windows-8/why-can-t-find-update-store

Please try the steps as stated in the statutes help and let us know the results.

Agent update Windows Installer return «windows update error unrecoverable Setup agent has met.

Hello

I have Windows 7 Ultimate 64-bit.

I downloaded the installer from the Windows Update Agent to obtain the latest Windows Update Agent.  (I now c:windowssystem32wuapi.dll version 7.3).  I got the installer of http://support.microsoft.com/kb/949104. (http://download.windowsupdate.com/windowsupdate/redist/standalone/7.4.7600.226/WindowsUpdateAgent30-x64.exe)

When I run the installer obtained above, I get the following error:

«windows update error unrecoverable Setup agent has met.

This installer is not compatible with Windows 7?

Thank you.

Try to do a Reset with the Fix It (aggressive mode) here: http://support.microsoft.com/kb/971058

Run you Win7 64-bit, or is this a brand new computer?

What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

Windows update error 80070643 code.

I, ve followed the two steps described in the help of the windows .net framework and support site but my problem was still not fixed. All the updates that are related to the problems caused by revised time…, can not be installed. Help, please!

So, what’s your Windows operating system?
What have you tried?

Is — this office updates or updates of the framework or other updates at the source of the problem?

FYI

You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates
http://support.Microsoft.com/kb/958052

You cannot install some programs or updates
http://support.Microsoft.com/kb/822798

Windows Update error 80070643
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643

Windows Update error 80070643
http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070643

When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update ‘0 x 643’ error code or error code Windows install «1603».
http://support.Microsoft.com/kb/923100

When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
http://support.Microsoft.com/kb/976982

TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

Windows update error 737D

I got an automatic update of windows of Microsoft SQL SERVER 2005, this has failed to be updated 3 times, when I checked help & followed the steps for error 737D when I arrived at the final stage, he said that it was not available. What should I do next?

What stage?

http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-737D

Windows Update error 737D

If you receive error 737D when you try to install updates for Windows, a previous update for Microsoft SQL Server 2005 did not finish install. To complete the installation of Microsoft SQL Server 2005, follow these steps:

1. Open programs and features by clicking on the button start , clicking Control Panel, clicking programs, and then clickingPrograms and features.

2. Select Microsoft SQL Server 2005, and then click on edit.

3. Currently installed programs, select Microsoft SQL Server 2005, and then clickChange.

4. In the component selection, select database engine, and then click Next.

5. In the maintenance of function, select database engine, and then click Next.

6. In Microsoft SQL Server 2005 installation, click Next.

7. In the System Configuration check, click Next.

8. To change or remove an Instance, click on complete the suspended installation.

9. By error and usage report settings, click Next.

10. In the ready to update, click on install.

11. Being installed, click Next.

12. Click Finish.

Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

Windows Update error 2147014851

I am running window version 6.1.7601 service pack 1 build 7601 x 86 based pc Intel (R) Core (TM) i3 cpu m330 at DH2.136 Hz SMBIOS version 2.6

I am not able to update also have connectivity problems to the window update service please help

You must be at the level of SP3 to use WU.

How to obtain the latest Windows XP service pack
http://support.Microsoft.com/kb/322389

Release notes for Windows XP Service Pack 3
http://support.Microsoft.com/kb/936929

The space of hard disk required for Windows XP Service Pack 3
http://support.Microsoft.com/kb/947311

Steps to take before you install Windows XP Service Pack 3
http://support.Microsoft.com/kb/950717

Windows Update error code 8E5E0147 when installing KB968930 update

I have windows vista and when I try to install update KB968930, I get the Windows Update error code 8E5E0147. Nothing seems to fix this error. Any suggestions?

Hello

There could be various reasons for the updates to fail. No matter what security software installed on the computer may crash or services related to the programs installed on the computer. Also if there are corruptions in the filesfolders related to Windows updates.

Reset update components would actually try fixing the part of corruption by recreating these files and also to re-register the files necessary .dll (Dynamic Link Library).

http://support.Microsoft.com/kb/968930

Some users corrected this problem by resetting the components of windows updates. Try these steps and check the result.

Temporary disable the firewall/security settings and check if it makes a difference.

http://support.Microsoft.com/kb/283673

Do allow him back course so that your computer is protected.

Method 1: Reset Windows Update components.
Log on as administrator.
a. visit http://support.microsoft.com/kb/971058
b. click Microsoft fix and run successfully.
c. restart the computer once the tool is run.

Method 2: I recommend you perform the clean boot.

Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

http://support.Microsoft.com/kb/929135

Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

For more information, see the following link below:
http://support.Microsoft.com/kb/2509997

Hope this information is useful.

Windows Update Error 80070002 — cannot be resolved with Windows Fixit who refuses to change windows update sites to the default settings

Tried to apply the SP2 for Windows Vista Home Premium 64-bit — Got err message 80070002 — deletion of files temporary for the manual updates-Tried to remove but ‘no go’… I tried MS Fixit — but got «does not work» when he tried to set the default windows update locations — HELP

http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

If you have tried the above and it does not solve your problem, you can try CD because it costs very little.

http://TechNet.Microsoft.com/en-us/Windows/bb738089

This page will display the SP1 of Vista, under the heading: order a DVD of Windows Vista SP1, click on your region and then select your country and will take you to a page where you can buy the SP1 and SP2

Save the link and it’s also for others to read this post wishing to purchase Service Packs for Vista as long download time saved and you can use them download are a problem or you reinstall your operating system.

If you later reinstall OS and you install the drivers manually install the Service Packs right after OS reinstalled before installing any drivers. You can first install the drivers but it is better Service Packs first as sometimes when you install a Service Pack after the drivers, you can find some drivers do not work and you have to reinstall these drivers.

For people using the original image, your drivers are already installed then install Service Packs just after the factory restore before installing applications or devices or download Windows updates.

Service Packs using immediately also save hundreds of download of the updates of Windows first of all that all updates to the top until the release of Service Packs are included.

Here are the numbers 1-800 that will put you in contact with a human being who will take your order: team Microsoft Supplemental part. The disc will cost $3.99 more delivery charges.

1-800-360-7561 United States

1 Canada-800-933-4750

Windows Update error 0 x 80070490

It is now April 2013, I purchased my XPS 10 a few months before. Last month whenever I try to download the updated Windows I get an error message that the update failed and when I trouble shoot results are due to the database of Windows Update error 0 x 80070490. As I said, this condition has just begun last month.

I run my desktop PC with Vista on the same modem and never experience this absurd repetition. I have scanned 10 pages of other members of similar questions but can’t find the 0 x 80070490 exact?

You should probably have posted to the Windows Update forum

In any case, see the following:

Error code 0 x 80070490 when you use Windows Update or Microsoft Update to install updates
http://support.Microsoft.com/kb/958044

Windows Update error Code 80246003 (* ignore title, read Rui Fialho response)
http://social.technet.Microsoft.com/forums/en-us/w8itprosecurity/thread/4c30dc8a-139e-4E78-b7ab-7412cbd4036f/

http://www.bleepingcomputer.com/forums/t/484657/WIN8-x64-Windows-Update-strange-behavior/

How can I fix error code 0 x 80070490. (windows update stopped running)
http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_update/how-do-i-fix-error-code-0x80070490windows-update/38fa3ffc-6361-4c14-83d3-13bc5c3a9047

error 0 x 80070490 windows update potential data base
http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_update/potential-Windows-Update-database-error-on/e5e799b4-1706-4C8D-B3F6-b457ed736bdc

How can I correct an error ‘0 x 80070490’ for Windows 8
http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_update/how-do-i-fix-an-error-0x80070490-for-Windows-8/2affb6cf-5721-4131-9c6e-ff35dc33216b

I can’t install the update to windows. Windows Update, error 0 x 80073712

Original title:

I can’t install the update to windows

I tried just like the boot minimum scannow command and enter this command disk I found on the internet then also im anle not installing the update

The main reason I want to install this update is because I want to upgrade my windows windows 8.1 8. When I try to update the store does not open the windows 8.1 update tile. Help, please

Here’s the error is for the installation of all these 3 updates

Windows Update, error 0 x 80073712
http://Windows.Microsoft.com/en-AU/Windows-8/Windows-Update-error-0x80073712

If you receive Windows Update error 80073712 0 x or 80073712, it means that a file needed by Windows Update is corrupted or missing.

I keep having a problem with this error message. Firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system. I’ve tried everything.

I keep having a problem with this error message. Firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system. I tried everything the internet suggested but it continues to wreak havoc… Help, please… John.I cannot give other details that it has become very annoying

See «hang out»:

• http://KB.mozillazine.org/Firefox_hangs
• Firefox crashes or does not — how to fix

Anti-Virus AppsInternet ProtocolsWindows 2000