Ксерокс 700 ошибка 042 326 - Не ошибается лишь тот, кто ничего не делает!

How do you get rid of error code 42-326 on the xerox 700 digital color press?
I believe that is the transfer belt silver patch is not being detected by the edge sensor, the patch and all rollers will need to be cleaned and the patch inspected for any damage or missing patch, then will need to do belt edge training to resolve the problem.
Ok, so you get that error fix — but you have rebooted the machine too many times. Now it is locked in the copy only mode. What is the code to reset the block?
Try this:
From your message you sound like someone who is trained in servicing this machine and you probably well know that using this procedure is at your own risk:
Hold down 0 (zero) for 5 seconds and press start (green) button
Enter 6789, confirm
Press log in/log out button or the key button
Press systems settings, common settings, maintenance, NVM read/ write
Enter nvm 741-105 and change it to 0 (zero)
I have also seen advice to, after cleaning or replacing the transfer belt, to check the belt hole sensor for paper dust or other contamination.
sefel
New Member

Joined:

Jan 2017

Messages:

2

Location:

Ghana

xerox 700 code 042-326

how do I enter the diagnotic mode on xerox 700 press
sefel
New Member

Joined:

Jan 2017

Messages:

2

Location:

Ghana

I have cleaned the IT belt but code is still there and therefore want to clear it and I don’t know how to enter the diagnostic mode
press 0 wait 5 second and click start button (green). now type 6789 and confirm.
Wondering if anyone is still monitoring this thread. I am having this same issue and I have replaced the belt, replaced the sensor and attempted to reset the NVM code but the error continues. Anybody have any other ideas or thoughts on this?

Статьи

Содержание

1 Xerox colour 550 , 042 326 error code.
2 Таблицы с расшифровкой ошибок Xerox WorkCentre 5020
- 2.1 A-коды
- 2.2 C-коды
- 2.3 E-коды
- 2.4 J-коды
- 2.5 N-коды
3

Xerox colour 550 , 042 326 error code.

I have Xerox colour 550 and has an error 042 326.. It says IBT error. The operator of this machine already done resetting..but still the same. He asked me for help and when I check and turn on the machine it does not initializef and the error popped up immediately.. he already cleaned the silver patch and the optical sensor and got no luck we even set the silver patch of the IBT in home position with the sensor but of no success. Does it need new IBT or do I need to check it further?

Таблицы с расшифровкой ошибок Xerox WorkCentre 5020

Все ошибки подразделяются на группы и могут иметь общие рекомендации по восстановлению работы устройства. Главное — избегать аппаратного вмешательства при серьезных поломках. Оставьте сложный ремонт профессионалам!

A-коды

A1	Бумага в податчике застряла, аккуратно вытяните ее.
A2	В податчике находятся листы большего размера, не совместимые со спецификациями МФУ. Они могут застрять. Выньте их и замените на другие.
A5	Крышку податчика нужно закрыть. Если используется стекло экспонирования, разделите толстый документ на части и произведите сканирование.

C-коды

C0	Отсканированный документ не помещается на бумаге, загруженной для печати. Уменьшите масштаб или замените бумагу.
C1	В первом лотке подачи застряла бумага. Удалите обрывки. Проверьте направляющие.
C2	Во втором лотке подачи застряла бумага. Удалите обрывки. Проверьте направляющие.
C3	В обходном лотке отсутствует / застряла бумага. Исправьте ситуацию.
C5	В первом лотке отсутствует бумага или размер и ориентация листов не совместимы с заданием печати.
C6	Во втором лотке отсутствует бумага или размер и ориентация листов не совместимы с заданием печати.
C7	Размер и ориентация листов в обходном лотке не совместимы с заданием печати. Загрузите бумагу необходимого формата.

E-коды

E0	Устройство удалило отсканированные документы перед выводом их на бумагу. Перезагрузите Xerox 5020 и повторите операцию.
E1	Произошло замятие бумаги в районе размещения печи (fuser unit). Устраните замятие.
E2	Возле левой крышки произошло замятие. Аккуратно выньте зажеванные листы.
E3	В зоне второго лотка произошло замятие. Аккуратно выньте зажеванные листы.
E4	В зоне левой крышки застряла бумага. Аккуратно выньте зажеванные листы.
E5	Открыты левая / передняя крышка. Перезакройте крышку.
E6	Открыты крышки. Необходимо их закрыть. Если проблема не устраняется, обратитесь в сервисный центр с неполадкой датчиков фиксации.
E8	Формат и ориентация бумаги в лотке не соответствует заданию печати.
E9	Печать выходит за рамки формата бумаги. Измените масштаб в меню аппарата или отмените задание.

J-коды

J1	Закончился тонер. Заправьте бункер хранения с помощью расходника 106R01277.
J3	Картридж установлен неправильно или не может быть распознан. Установите комплектующее. При необходимости замените на новое.
J6	Нужна замена картриджа.
J7	Принт-картридж не работает.

N-коды

n1	Память аппарата переполнена. Отмените задание. Перезагрузите устройство, а затем повторите операцию.
n4	Ошибка передачи файла, отправленного в печать. Также могут быть проблемы со считыванием документа: в таких случаях замените расширение PDF на JPG / PNG.
n5	Ошибка связи между печатающим механизмом и сканером / ПК. Xerox 5020 автоматически устранит неполадку через некоторое время.
n9	Ошибка связи отдельных элементов принтера. Требуется перезагрузка. При повторном возникновении неисправности следует вызвать мастера.

Цифровая

печатная

машина

Xerox 700 —

Дополнительное

оборудование

Застряла

бумага

Застревание

тракте

•

подачи
На

пользовательском

•

интерфейсе

отображается

уведомление

застревании

Откройте

переднюю

дверцу

•

Аккуратно

вытащите

все

листы

обрывки

•

бумаги

из

зон

застревания

Закройте

переднюю

дверцу

•

Убедитесь

что

используемая

бумага

•

соответствует

предусмотренным

требованиям

048 300

Открыта

передняя

дверца

Закройте

переднюю

дверцу

048 310
048 311
048 312
048 313
048 314
048 315
048 316

Сбой

датчика

ремня

устройства

разглаживания

Выключите

снова

включите

питание

048 318
048 319

Сбой

вентилятора

охлаждения

Выключите

снова

включите

питание

048 320
048 321
048 322

Сбой

связи

или

неисправность

подключения

Проверьте

соединение

между

•

интерфейсным

модулем

устройством

послепечатной

обработки

Выключите

снова

включите

питание

•

048 323

Сбой

интерфейсного

модуля

Выключите

снова

включите

питание

Источники

https://vkspy.info/pc/sbros-oshibki-10-327-i-drugih-oshibok-fyuzera-xerox-workcentre-5225-5230
https://rem-xepox.com/services/print/errors.html
https://moscowtoner.ru/kody-xerox-5020-oshibki-pechati-populyarnogo-printera/

[свернуть]

Dislikes: 0

07-21-2013

#1

Technician

Rep Power

20

Xerox 252, fault code 042-326 or 042-327

we just cleared a Bad Paper jam on our xerox 252, restarted the machine and now its giving us fault 042-326. Tried to move and center IBT Belt, then got fault code 042-327. Are these 2 faults related? How can they be cleared? Iam missing something?
Your Help is very much appreciated.
07-21-2013

#2

Re: Xerox 252, fault code 042-326 or 042-327

Did you check IBT silver patch? Is it dirty?
07-21-2013

#3

Technician

Rep Power

20

Re: Xerox 252, fault code 042-326 or 042-327

Originally Posted by bojans

Did you check IBT silver patch? Is it dirty?

I cleaned the silver patch inside the belt. Now it’s mainly fault 042-327Is there a way to set the belt in zero position?
07-21-2013

#4

Re: Xerox 252, fault code 042-326 or 042-327

First you need to remove the IBT assembly and make sure the belt is installed so that the IBT belt edge and the IBT belt frame are approx the same distance from the front and rear.

Next you need to run the Belt Edge Learn adjustment.

Enter diagnostics mode:
Press and hold the 0 key for 5 seconds.
While still holding the 0 key, press the start key.
The CE Access Number screen will appear.
Enter 6789 and confirm.
The topmost area of the UI display will change to a white banner with black lettering to let the user know that the mode has changed to the CE mode.

Press the log in/out button.
select system settings
select common settings
select maintenance / diagnostics
select sub system
select belt edge learn
select start

Hope that fixes it for you. If not there are a bunch of additional steps to troubleshoot this error.
07-22-2013

#5

Trusted Tech

50+ Posts

Rep Power

21

Re: Xerox 252, fault code 042-326 or 042-327

have you check the 741-105 make sure is 0 thanks
07-22-2013

#6

Technician

Rep Power

20

Re: Xerox 252, fault code 042-326 or 042-327

Originally Posted by max2013

have you check the 741-105 make sure is 0 thanks

Followed all instructions, removed belt, put it back on. Machine starts with no fault, but when I enter belt edge learn menu and start the operation the machine faults back again to 042-327. Could it be the belt itself that needs to be changed. It does not any damage. Please HELP!!!!
07-22-2013

#7

Re: Xerox 252, fault code 042-326 or 042-327

It’s time for service manual to read and follow proper procedures !
07-23-2013

#8

Trusted Tech

50+ Posts

Rep Power

25

Re: Xerox 252, fault code 042-326 or 042-327

Originally Posted by mpsolutions

Followed all instructions, removed belt, put it back on. Machine starts with no fault, but when I enter belt edge learn menu and start the operation the machine faults back again to 042-327. Could it be the belt itself that needs to be changed. It does not any damage. Please HELP!!!!

You can get a silver patch and place before the current silver patch. However, saying that I have replaced 2 pretty good belts due to the weather conditions. On days that are too cold I have noticed the edges of the belt curl upwards and the silver patch is sometimes not detected. When the room is an appropriate temperature the edges seem to go back into the appropriate shape.
07-25-2013

#9

Senior Tech

100+ Posts

Rep Power

0

Re: Xerox 252, fault code 042-326 or 042-327

Try to cut new silver patch from oracal film, and replace old patch with new one. I did that many times.
Hope it helps.
I attached picture.
07-30-2013

#10

Re: Xerox 252, fault code 042-326 or 042-327

Make sure the optical sensor that reads the reflective patch is clean. Tends to get dusty.

Tags for this Thread

042-326,

bad,

belt,

center,

code,

fault,

jam,

machine,

paper,

paper jam,

xerox

View Tag Cloud

Bookmarks

Posting Permissions

You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
[VIDEO] code is On
HTML code is Off

Forum Rules

Источник

Article Id: 1134463
|
Published: 01/19/2021

Product support for

Xerox® Color 550/560/570
Xerox® Color C60/C70
Xerox Color EC70 Printer
550_560_DCP Family
C60_C70_DCP Family

Источник

Go Back
Blog
Xerox® DocuColor™ 240 242 250 252 260 550 560 570 C60 C70 700 700i 770 C75 J75 Versant 80 2100 3100 4100 Error 042-326

Xerox® DocuColor™ 240 242 250 252 260 550 560 570 C60 C70 700 700i 770 C75 J75 Versant 80 2100 3100 4100 Error 042-326

8th April 2021

If the fault 042-326 was declared 3 times in succession the print mode of the machine will be disabled. In order to clear this error you need to reset the NVM location 741-105 to 0. The error states that the IBT Belt Home position was not detected in time. Try the procedure below, but if you still get the error then there is a problem in the IBT area of the machine. It could be something simple like dirt of the sensor, a missing silver patch on the underside of the IBT belt or it could be the something to do with the tracking device on the IBT assembly.

To Get Into Service Mode; Press the 0 button for 5 seconds, then press start whilst still holding the 0 button.

Type in 6789 as the password and then press confirm. Press the log in/log out button

Go to systems settings common settings maintenance Change the NVM location 741-105 to 0 (on 550 560 570 C60 C70 it’s 741-119, DCP 700 700i 770 it’s 741-106, C75 J75 it’s 741-132, Versant 80 180 741-700, Versant 280 is 741-525), save and restart the machine.

If the problem continues send us an email to sales@xentair.com and we can help you further.

Dislikes: 0

07-21-2013

#1

Technician

Rep Power

20

Xerox 252, fault code 042-326 or 042-327

we just cleared a Bad Paper jam on our xerox 252, restarted the machine and now its giving us fault 042-326. Tried to move and center IBT Belt, then got fault code 042-327. Are these 2 faults related? How can they be cleared? Iam missing something?
Your Help is very much appreciated.
07-21-2013

#2

Re: Xerox 252, fault code 042-326 or 042-327

Did you check IBT silver patch? Is it dirty?
07-21-2013

#3

Technician

Rep Power

20

Re: Xerox 252, fault code 042-326 or 042-327

Originally Posted by bojans

Did you check IBT silver patch? Is it dirty?

I cleaned the silver patch inside the belt. Now it’s mainly fault 042-327Is there a way to set the belt in zero position?
07-21-2013

#4

Re: Xerox 252, fault code 042-326 or 042-327

First you need to remove the IBT assembly and make sure the belt is installed so that the IBT belt edge and the IBT belt frame are approx the same distance from the front and rear.

Next you need to run the Belt Edge Learn adjustment.

Enter diagnostics mode:
Press and hold the 0 key for 5 seconds.
While still holding the 0 key, press the start key.
The CE Access Number screen will appear.
Enter 6789 and confirm.
The topmost area of the UI display will change to a white banner with black lettering to let the user know that the mode has changed to the CE mode.

Press the log in/out button.
select system settings
select common settings
select maintenance / diagnostics
select sub system
select belt edge learn
select start

Hope that fixes it for you. If not there are a bunch of additional steps to troubleshoot this error.
07-22-2013

#5

Trusted Tech

50+ Posts

Rep Power

21

Re: Xerox 252, fault code 042-326 or 042-327

have you check the 741-105 make sure is 0 thanks
07-22-2013

#6

Technician

Rep Power

20

Re: Xerox 252, fault code 042-326 or 042-327

Originally Posted by max2013

have you check the 741-105 make sure is 0 thanks

Followed all instructions, removed belt, put it back on. Machine starts with no fault, but when I enter belt edge learn menu and start the operation the machine faults back again to 042-327. Could it be the belt itself that needs to be changed. It does not any damage. Please HELP!!!!
07-22-2013

#7

Re: Xerox 252, fault code 042-326 or 042-327

It’s time for service manual to read and follow proper procedures !
07-23-2013

#8

Trusted Tech

50+ Posts

Rep Power

25

Re: Xerox 252, fault code 042-326 or 042-327

Originally Posted by mpsolutions

Followed all instructions, removed belt, put it back on. Machine starts with no fault, but when I enter belt edge learn menu and start the operation the machine faults back again to 042-327. Could it be the belt itself that needs to be changed. It does not any damage. Please HELP!!!!

You can get a silver patch and place before the current silver patch. However, saying that I have replaced 2 pretty good belts due to the weather conditions. On days that are too cold I have noticed the edges of the belt curl upwards and the silver patch is sometimes not detected. When the room is an appropriate temperature the edges seem to go back into the appropriate shape.
07-25-2013

#9

Senior Tech

100+ Posts

Rep Power

0

Re: Xerox 252, fault code 042-326 or 042-327

Try to cut new silver patch from oracal film, and replace old patch with new one. I did that many times.
Hope it helps.
I attached picture.
07-30-2013

#10

Re: Xerox 252, fault code 042-326 or 042-327

Make sure the optical sensor that reads the reflective patch is clean. Tends to get dusty.