Net user add ошибка 5 - Не ошибается лишь тот, кто ничего не делает!

on August 30, 2010

Windows restricts privileged commands to be executed only from elevated administrator command prompt. Even if you are an administrator on the PC, you may run into the error ‘System error 5 has occurred. Access is denied’.

C:>net user techblogger /add
System error 5 has occurred.
Access is denied.

To fix the issue, open elevated command prompt and run the same command.

How to open elevated administrator command prompt

Now the command would run fine.

C:Windowssystem32>net user techblogger /add
The command completed successfully.
C:Windowssystem32>

There could be other cases where one runs into this error. If you have got this error, let us know what was the instance and how you could fix it.

Источник

Remove From My Forums

Как на всех доменных компьютерах создать локальную учетку администратора?

Question
Имеется большой парк техники введенной в домен AD. Бывают случаи, что компьютер еряет довериельные отношения с доменом и поэтому войти под доменной учеткой не имеется возможным, а часто системная
локальная учетка админа либо выключена либо пароль поставили и забыли.

Как на всех доменных компьютерах создать локальную учетку администратора?

Answers

Имеется большой парк техники введенной в домен AD. Бывают случаи, что компьютер еряет довериельные отношения с доменом и поэтому войти под доменной учеткой не имеется возможным, а часто системная
локальная учетка админа либо выключена либо пароль поставили и забыли.

Как на всех доменных компьютерах создать локальную учетку администратора?

На всех компьютерах и так всегда есть учетная запись встроенного администратора. Можете использовать ее без создания новой (если знайте пароль).

Если вы хотите создать еще одну учетную запись, то это можно сделать многими методами, например выполнив команды:

net user /add имя пароль

net net localgroup Administrators имя /add

Эти команды можно выполнить например, в скрипте при загрузке или авторизации который можно сконфигурировать через политики домена (Group policy/scheduled tasks). Но, конечно, они должны выполняться под учетной записью с достаточными
правами.

This posting is provided «AS IS» with no warranties, and confers no rights.
- Marked as answer by
  
  Monday, December 13, 2021 10:39 AM
Приветствую.

Используйте встроенную учетную запись локального Администратора, по автоматической смене пароля, посмотрите в сторону
Local Administrator Password Solution (LAPS)

Я не волшебник, только учусь. MCTS, CCNA. Если вам помог чей-либо ответ, пожалуйста, не забывайте нажать на кнопку «отметить как ответ» или проголосовать за «полезное сообщение». Disclaimer: Мнения, высказанные здесь,
являются отражением моих личных взглядов, а не позиции работодателя. Вся информация предоставляется как есть, без каких-либо на то гарантий.
Блог IT Инженера,
Яндекс Дзен, YouTube,
GitHub, Facebook,
TechNet Forum Team.
- Edited by
  Alexander RusinovModerator
  Monday, October 25, 2021 6:56 PM
  Дополнение
- Marked as answer by
  Vector BCOModerator
  Monday, December 13, 2021 10:39 AM

Источник

I have the problem that I am getting a

System error 5 has occurred. Access is denied.

error when I am trying to run the command

net user /domain <username>

with a regular domain user account (not domain administrator or local administrator).

We need to run this command not as an administrator to load a certain workload for our non admin users, using a script. On other server systems with the exact the same policy and same domain settings I was able to run this command as a non admin user. I even exported a policies from the project that does not get an error and imported them, but unfortunately without success…

Internet research says that the GP setting «Network access. Restrict clients allowed to make remote calls to SAM» may be the solution.

I’ve add the group that should be able to make a net user request, updated the policy on the server and the group was showing up as «allowed». Unfortunately this solution also did not work for me and I still had exactly the same error:

System error 5 has occurred. Access is denied.

The only difference that the project with this problem has to the project that works is the Windows Version:

The project that works has: Windows W2019 1809 / 17763.1935
The project with a problem: Windows 2019 1809 / 17763.1790

Could you help me to find out the solution for this problem, please?
So I could bring the project live.

Источник

Disabling your antivirus is one effective way to fix this issue

by Matthew Adams

Matthew is a freelancer who has produced a variety of articles on various topics related to technology. His main focus is the Windows OS and all the things… read more

Updated on December 16, 2022

Reviewed by
Vlad Turiceanu

Passionate about technology, Windows, and everything that has a power button, he spent most of his time developing new skills and learning more about the tech world. Coming… read more

Today we’ll show you how to fix Error 5: Access is denied in Windows 10 and Windows 11.
Error 5: Access is denied will prevent the installation of certain programs and apps.
This is usually related to certain admin rights, so we’ll show you how to adjust a few settings to fix Exit status 5 Access is denied via Powershell.
Exit status 5: Access is denied can be fixed by using the CMD as well.

XINSTALL BY CLICKING THE DOWNLOAD FILE

To fix various PC problems, we recommend Restoro PC Repair Tool:
This software will repair common computer errors, protect you from file loss, malware, hardware failure and optimize your PC for maximum performance. Fix PC issues and remove viruses now in 3 easy steps:

Download Restoro PC Repair Tool that comes with Patented Technologies (patent available here).
Click Start Scan to find Windows issues that could be causing PC problems.
Click Repair All to fix issues affecting your computer’s security and performance

Restoro has been downloaded by 0 readers this month.

Error 5: Access is denied is primarily a software installation error message.

Consequently, when this error message pops up, users can’t install certain software. The cause is usually account permissions.

In this article, we explain how to change permissions and troubleshoot the mentioned error.

What is error code 5?

Error Code 5 is a Windows error code that shows whenever the user does not have adequate authority to access the requested file or location.

This could be because the user does not have administrative privileges.

Why do I keep getting error 5?

There are a series of reasons you get the access denied error on Windows 11. The major one is that your system is yet to grant permission to the user account you are currently using. Below are some of the variations of the error:

Error 5 access is denied putty
Error 5 access is denied Windows service
Error 5 access is denied DISM
Error 5 access is denied win32 disk imager
Error 5 access is denied robocopy
Error 5 access is denied dev c++
Visual Studio Code error 5 access is denied
System error 5 has occurred
Error 5 access is denied Windows 11
The authorization of the user failed with error 5
Operating system error 5(access is denied.)
Exit status 5 access is denied. stack overflow
Exit status 5 access is denied vscode
Exit status 5: access is denied. windows
The process’ exit code is exited and its exit status is 255
NVM use exit status 5: access is denied

Nonetheless, you can address these errors by following the solutions below.

How do I fix error 5 access denied?

Switch off or change the antivirus software
Run the installer as admin
Switch your user account to an admin profile
Enable the built-in admin account via Command Prompt
Open the Program Install and Uninstall troubleshooter
Move the installer to the C: Drive
Adjust the UAC settings
Restore Windows with System Restore

1. Switch off or change the antivirus software

Error 5: Access is denied could be due to third-party antivirus software. Some programs can mistake a genuine setup wizard to be something else, which is otherwise false positive detection.

The best solution would be to use an antivirus that detects few false positives or none at all. Up-to-date antivirus software should not faultily detect malicious software as they keep real-time records of all threats, old and new.

You can find plenty of Windows 10 compatible antivirus tools that can silently run in the background and protect you at all times without triggering false alerts or interfering with your system.

If you prefer using your current antivirus, switch it off temporarily to ensure that it doesn’t interfere with the installer.

You can temporarily switch off antivirus software by selecting a disable option on the context menus. For example, Avast includes an Avast shield control setting on its context menu.

Alternatively, you can also leave anti-virus utilities out of the Windows startup via Task Manager as follows.

Right-click the taskbar and select Task Manager.
Select the Start-up tab shown in the snapshot directly below.
Select anti-virus software included in the startup and press the Disable button.
Then restart the desktop or laptop.

2. Run the installer as admin

Admin rights are required to install some programs. So a program might install if you right-click its installer and select Run as administrator.

Some PC issues are hard to tackle, especially when it comes to corrupted repositories or missing Windows files. If you are having troubles fixing an error, your system may be partially broken.
We recommend installing Restoro, a tool that will scan your machine and identify what the fault is.
Click here to download and start repairing.

This is a straightforward fix, but it often does the trick.

3. Switch your user account to an admin profile

If selecting the Run as administrator option doesn’t do the trick, you might need to install the software within an admin user account.

Thus, you might need to convert your standard account to an admin one. This is how you can switch your profile to an administrator one via the Control Panel:

Open Run by pressing the Win key + R hotkey.
Input netplwiz in the text box, and press its OK button.
Select your user profile, and press the Properties button.
Then select the Group Membership tab to open the options menu.
Select the Administrator option, and press the Apply and OK buttons.

4. Enable the built-in admin account via Command Prompt

Press the Windows key + X hotkey.
Then select Command Prompt (Admin).
Input the following command and press Enter: net user administrator /active:yes
Thereafter, close the Prompt and try to install the required software.
You can disable the built-in admin profile by entering net user administrator /active:no

5. Open the Program Install and Uninstall troubleshooter

Microsoft’s Program Install and Uninstall troubleshooter can fix installation errors. That’s especially the case if there are corrupt registry keys blocking software installation.

This tool is not included in Windows 1o, but you can save it by clicking the Download button on this webpage.

Then open the downloaded troubleshooter, and press the Next button to run it.

6. Move the installer to the C: Drive

If you’re opening the installer from an alternative drive to the one Windows is on (usually the C: drive), move the setup wizard to the C: drive.

You can do that by left-clicking the installer in File Explorer and dragging it onto the C: drive.

Then you’ll see a Move to the tooltip.

Let go of the left mouse button to move the installer. Thereafter, you can open the program’s setup wizard from the C: drive.

Read more about this topic

How to fix error 0x80070570 in Windows 10/11 [Best Solutions]
2 Best Ways to Split Screen on Windows 10
Event ID 1008: How to Fix It on Windows 10 & 11
Easy Ways to Bypass Admin Password on Windows 10

7. Adjust the UAC Settings

First, press the Windows key + X hotkey.
Select Run to open that accessory.
Enter UserAccountControlSettings and click OK.
Then drag the bar on that window to Never notify.
Press the OK button, and restart your device.

8. Restore Windows with System Restore

To open System Restore, press the Windows key + R hotkey.
Then input rstrui and click the OK button.
Press the Next button on the System Restore window.
Click the Show more restore points option to expand the list of restore points.
Select a restore point that will restore Windows to a date when the Error 5: Access is denied wasn’t popping up.
Restoring Windows removes software installed after the selected restore point. To see what software a restore point removes, press the Scan for affected programs button
Click the Next and Finish buttons to confirm your selected restore point.

The Error 5: Access is denied message can pop up as a result of a corrupted system account or active directory, as well. Restoring Windows to an earlier date will fix such issues.

The solutions mentioned above will help you fix the Error 5: Access is denied error in Windows so that you can install the required software.

Aside from those resolutions, scanning the registry with a registry cleaner is never a bad idea.

Updating antiquated drivers might also fix the issue.

As always, if you have any other questions or suggestions, don’t hesitate to leave them in the comments section below and we’ll be sure to check them out.